New Parts

ImagePart NumberDescription
C42-116-AT-8
36 in. ONE PIECE WING A TIP PLATES 8 in. Mount Tab Centerline
36 in. Wide
10 in. Chord Length
Includes Outer Tip Plates
Made in the USA See Product Details
C42-116-BT-8
36 in. ONE PIECE WING B TIP PLATES 8 in. Mount Tab Centerline
36 in. Wide
10 in. Chord Length
Includes Outer Tip Plates
Made in the USA See Product Details
C42-116-CT-8
36 in. ONE PIECE WING C TIP PLATES 8 in. Mount Tab Centerline
36 in. Wide
10 in. Chord Length
Includes Outer Tip Plates
Made in the USA See Product Details
C42-118-AT-10
40 in. ONE PIECE WING A TIP PLATES 10 in. Mount Tab Centerline
40 in. Wide
10 in. Chord Length
Includes Outer Tip Plates
Made in the USA See Product Details
C42-118-BT-10
40 in. ONE PIECE WING B TIP PLATES 10 in. Mount Tab Centerline
40 in. Wide
10 in. Chord Length
Includes Outer Tip Plates
Made in the USA See Product Details
C42-118-CT-10
40 in. ONE PIECE WING C TIP PLATES 10 in. Mount Tab Centerline
40 in. Wide
10 in. Chord Length
Includes Outer Tip Plates
Made in the USA See Product Details
C42-122-AT
6 in. WIDE CANARD WINGS WITH A TIP PLATES SET INCLUDES, (2) CANARDS, OUTER TIP PLATES, AND SCREWS
6 in. Wide
10 in. Chord Length
Made in the USA See Product Details
C42-122-BT
6 in. WIDE CANARD WINGS WITH B TIP PLATES SET INCLUDES, (2) CANARDS, OUTER TIP PLATES, AND SCREWS
6 in. Wide
10 in. Chord Length
Made in the USA See Product Details
C42-122-CT
6 in. WIDE CANARD WINGS WITH C TIP PLATES SET INCLUDES, (2) CANARDS, OUTER TIP PLATES, AND SCREWS
6 in. Wide
10 in. Chord Length
Made in the USA See Product Details
C42-123-AT
6 in. WIDE CANARD WINGS WITH A TIP PLATES SET INCLUDES (2) CANARDS, INNER AND OUTER TIP PLATES, AND SCREWS.
6 in. Wide
10 in. Chord Length
Made in the USA See Product Details
C42-123-BT
6 in. WIDE CANARD WINGS WITH B TIP PLATES SET INCLUDES (2) CANARDS, INNER AND OUTER TIP PLATES, AND SCREWS.
6 in. Wide
10 in. Chord Length
Made in the USA See Product Details
C42-123-CT
6 in. WIDE CANARD WINGS WITH C TIP PLATES SET INCLUDES (2) CANARDS, INNER AND OUTER TIP PLATES, AND SCREWS.
6 in. Wide
10 in. Chord Length
Made in the USA See Product Details
C42-124-AT
8 in. WIDE CANARD WINGS WITH A TIP PLATES SET INCLUDES, (2) CANARDS, OUTER TIP PLATES, AND SCREWS
8 in. Wide
10 in. Chord Length
Made in the USA See Product Details
C42-124-BT
8 in. WIDE CANARD WINGS WITH B TIP PLATES SET INCLUDES, (2) CANARDS, OUTER TIP PLATES, AND SCREWS
6 in. Wide
10 in. Chord Length
Made in the USA See Product Details
C42-124-CT
8 in. WIDE CANARD WINGS WITH C TIP PLATES SET INCLUDES, (2) CANARDS, OUTER TIP PLATES, AND SCREWS
6 in. Wide
10 in. Chord Length
Made in the USA See Product Details
C42-125-AT
8 in. WIDE CANARD WINGS WITH A TIP PLATES SET INCLUDES (2) CANARDS, INNER AND OUTER TIP PLATES, AND SCREWS.
8 in. Wide
10 in. Chord Length
Made in the USA See Product Details
C42-125-BT
8 in. WIDE CANARD WINGS WITH B TIP PLATES SET INCLUDES (2) CANARDS, INNER AND OUTER TIP PLATES, AND SCREWS.
8 in. Wide
10 in. Chord Length
Made in the USA See Product Details
C42-125-CT
8 in. WIDE CANARD WINGS WITH C TIP PLATES SET INCLUDES (2) CANARDS, INNER AND OUTER TIP PLATES, AND SCREWS.
8 in. Wide
10 in. Chord Length
Made in the USA See Product Details
C42-126-AT
12 in. WIDE CANARD WINGS WITH A TIP PLATES SET INCLUDES, (2) CANARDS, OUTER TIP PLATES, AND SCREWS
12 in. Wide
10 in. Chord Length
Made in the USA See Product Details
C42-126-BT
12 in. WIDE CANARD WINGS WITH B TIP PLATES SET INCLUDES, (2) CANARDS, OUTER TIP PLATES, AND SCREWS
12 in. Wide
10 in. Chord Length
Made in the USA See Product Details
C42-126-CT
12 in. WIDE CANARD WINGS WITH C TIP PLATES SET INCLUDES, (2) CANARDS, OUTER TIP PLATES, AND SCREWS
12 in. Wide
10 in. Chord Length
Made in the USA See Product Details
C42-127-AT
12 in. WIDE CANARD WINGS WITH A TIP PLATES SET INCLUDES (2) CANARDS, INNER AND OUTER TIP PLATES, AND SCREWS.
12 in. Wide
10 in. Chord Length
Made in the USA See Product Details
C42-127-BT
12 in. WIDE CANARD WINGS WITH B TIP PLATES SET INCLUDES (2) CANARDS, INNER AND OUTER TIP PLATES, AND SCREWS.
12 in. Wide
10 in. Chord Length
Made in the USA See Product Details
C42-127-CT
12 in. WIDE CANARD WINGS WITH C TIP PLATES SET INCLUDES (2) CANARDS, INNER AND OUTER TIP PLATES, AND SCREWS.
12 in. Wide
10 in. Chord Length
Made in the USA See Product Details
C42-128-AT
14 in. WIDE CANARD WINGS WITH A TIP PLATES SET INCLUDES, (2) CANARDS, OUTER TIP PLATES, AND SCREWS
14 in. Wide
10 in. Chord Length
Made in the USA See Product Details
C42-128-BT
14 in. WIDE CANARD WINGS WITH B TIP PLATES SET INCLUDES, (2) CANARDS, OUTER TIP PLATES, AND SCREWS
14 in. Wide
10 in. Chord Length
Made in the USA See Product Details
C42-128-CT
14 in. WIDE CANARD WINGS WITH C TIP PLATES SET INCLUDES, (2) CANARDS, OUTER TIP PLATES, AND SCREWS
14 in. Wide
10 in. Chord Length
Made in the USA See Product Details
C42-129-AT
14 in. WIDE CANARD WINGS WITH A TIP PLATES SET INCLUDES (2) CANARDS, INNER AND OUTER TIP PLATES, AND SCREWS.
14 in. Wide
10 in. Chord Length
Made in the USA See Product Details
C42-129-BT
14 in. WIDE CANARD WINGS WITH B TIP PLATES SET INCLUDES (2) CANARDS, INNER AND OUTER TIP PLATES, AND SCREWS.
14 in. Wide
10 in. Chord Length
Made in the USA See Product Details
C42-129-CT
14 in. WIDE CANARD WINGS WITH C TIP PLATES SET INCLUDES (2) CANARDS, INNER AND OUTER TIP PLATES, AND SCREWS.
14 in. Wide
10 in. Chord Length
Made in the USA See Product Details
C42-132-AT
18 in. WIDE CANARD WINGS WITH A TIP PLATES SET INCLUDES, (2) CANARDS, OUTER TIP PLATES, AND SCREWS
18 in. Wide
10 in. Chord Length
Made in the USA See Product Details
C42-132-BT
18 in. WIDE CANARD WINGS WITH B TIP PLATES SET INCLUDES, (2) CANARDS, OUTER TIP PLATES, AND SCREWS
18 in. Wide
10 in. Chord Length
Made in the USA See Product Details
C42-132-CT
18 in. WIDE CANARD WINGS WITH C TIP PLATES SET INCLUDES, (2) CANARDS, OUTER TIP PLATES, AND SCREWS
18 in. Wide
10 in. Chord Length
Made in the USA See Product Details
C42-136-AT-15
36 in. REAR WING A TIP PLATES 15 in. Mount Tab Centerline
36 in. Wide
15 in. Chord Length
Includes Outer Tip Plates
Made in the USA See Product Details
C42-136-AT-1714
36 in. REAR WING A TIP PLATES 17-1/4 in. Mount Tab Centerline
36 in. Wide
15 in. Chord Length
Includes Outer Tip Plates
Made in the USA See Product Details
C42-136-AT-8
36 in. REAR WING A TIP PLATES 8 in. Mount Tab Centerline
36 in. Wide
15 in. Chord Length
Includes Outer Tip Plates
Made in the USA See Product Details
C42-136-BT-15
36 in. REAR WING B TIP PLATES 15 in. Mount Tab Centerline
36 in. Wide
15 in. Chord Length
Includes Outer Tip Plates
Made in the USA See Product Details
C42-136-BT-1714
36 in. REAR WING B TIP PLATES 17-1/4 in. Mount Tab Centerline
36 in. Wide
15 in. Chord Length
Includes Outer Tip Plates
Made in the USA See Product Details
C42-136-BT-8
36 in. REAR WING B TIP PLATES 8 in. Mount Tab Centerline
36 in. Wide
15 in. Chord Length
Includes Outer Tip Plates
Made in the USA See Product Details
C42-136-CT-15
36 in. REAR WING C TIP PLATES 15 in. Mount Tab Centerline
36 in. Wide
15 in. Chord Length
Includes Outer Tip Plates
Made in the USA See Product Details
C42-136-CT-1714
36 in. REAR WING C TIP PLATES 17-1/4 in. Mount Tab Centerline
36 in. Wide
15 in. Chord Length
Includes Outer Tip Plates
Made in the USA See Product Details
C42-136-CT-8
36 in. REAR WING C TIP PLATES 8 in. Mount Tab Centerline
36 in. Wide
15 in.Chord Length
Includes Outer Tip Plates
Made in the USA See Product Details
C42-136-DT-15
36 in. REAR WING D TIP PLATES 15 in. Mount Tab Centerline
36 in. Wide
15 in.Chord Length
Includes Outer Tip Plates
Made in the USA See Product Details
C42-136-DT-1714
36 in. REAR WING D TIP PLATES 17-1/4 in. Mount Tab Centerline
36 in. Wide
15 in.Chord Length
Includes Outer Tip Plates
Made in the USA See Product Details
C42-136-DT-8
36 in. REAR WING D TIP PLATES 8 in. Mount Tab Centerline
36 in. Wide
15 in. Chord Length
Includes Outer Tip Plates
Made in the USA See Product Details
C42-136-ET-15
36 in. REAR WING E TIP PLATES 15 in. Mount Tab Centerline
36 in. Wide
15 in. Chord Length
Includes Outer Tip Plates
Made in the USA See Product Details
C42-136-ET-1714
36 in. REAR WING E TIP PLATES 17-1/4 in. Mount Tab Centerline
36 in. Wide
15 in.Chord Length
Includes Outer Tip Plates
Made in the USA See Product Details
C42-136-ET-8
36 in. REAR WING E TIP PLATES 8 in. Mount Tab Centerline
36 in. Wide
15 in.Chord Length
Includes Outer Tip Plates
Made in the USA See Product Details
C42-136-FT-15
36 in. REAR WING F TIP PLATES 15 in. Mount Tab Centerline
36 in. Wide
15 in. Chord Length
Includes Outer Tip Plates
Made in the USA See Product Details
C42-136-FT-1714
36 in. REAR WING F TIP PLATES 17-1/4 in. Mount Tab Centerline
36 in. Wide
15 in. Chord Length
Includes Outer Tip Plates
Made in the USA See Product Details
C42-136-FT-8
36 in. REAR WING F TIP PLATES 8 in. Mount Tab Centerline
36 in. Wide
15 in. Chord Length
Includes Outer Tip Plates
Made in the USA See Product Details
C42-140-AT-15
40 in. REAR WING A TIP PLATES 15 in. Mount Tab Centerline
40 in. Wide
15 in. Chord Length
Includes Outer Tip Plates
Made in the USA See Product Details
C42-140-AT-1714
40 in. REAR WING A TIP PLATES 17-1/4 in. Mount Tab Centerline
40 in. Wide
15 in. Chord Length
Includes Outer Tip Plates
Made in the USA See Product Details
C42-140-BT-15
40 in. REAR WING B TIP PLATES 15 in. Mount Tab Centerline
40 in. Wide
15 in. Chord Length
Includes Outer Tip Plates
Made in the USA See Product Details
C42-140-BT-1714
40 in. REAR WING B TIP PLATES 17-1/4 in. Mount Tab Centerline
40 in. Wide
15 in. Chord Length
Includes Outer Tip Plates
Made in the USA See Product Details
C42-140-CT-15
40 in. REAR WING C TIP PLATES 15 in. Mount Tab Centerline
40 in. Wide
15 in. Chord Length
Includes Outer Tip Plates
Made in the USA See Product Details
C42-140-CT-1714
40 in. REAR WING C TIP PLATES 17-1/4 in. Mount Tab Centerline
40 in. Wide
15 in. Chord Length
Includes Outer Tip Plates
Made in the USA See Product Details
C42-140-DT-15
40 in. REAR WING D TIP PLATES 15 in. Mount Tab Centerline
40 in. Wide
15 in. Chord Length
Includes Outer Tip Plates
Made in the USA See Product Details
C42-140-DT-1714
40 in. REAR WING D TIP PLATES 17-1/4 in. Mount Tab Centerline
40 in. Wide
15 in. Chord Length
Includes Outer Tip Plates
Made in the USA See Product Details
C42-140-ET-15
40 in. REAR WING E TIP PLATES 15 in. Mount Tab Centerline
40 in. Wide
15 in. Chord Length
Includes Outer Tip Plates
Made in the USA See Product Details
C42-140-ET-1714
40 in. REAR WING E TIP PLATES 17-1/4 in. Mount Tab Centerline
40 in. Wide
15 in. Chord Length
Includes Outer Tip Plates
Made in the USA See Product Details
C42-140-FT-15
40 in. REAR WING F TIP PLATES 15 in. Mount Tab Centerline
40 in. Wide
15 in. Chord Length
Includes Outer Tip Plates
Made in the USA See Product Details
C42-140-FT-1714
40 in. REAR WING F TIP PLATES 17-1/4 in. Mount Tab Centerline
40 in. Wide
15 in. Chord Length
Includes Outer Tip Plates
Made in the USA See Product Details
C42-144-AT-15
44 in. REAR WING A TIP PLATES 15 in. Mount Tab Centerline
44 in. Wide
15 in. Chord Length
Includes Outer Tip Plates
Made in the USA See Product Details
C42-144-AT-1714
44 in. REAR WING A TIP PLATES 17-1/4 in. Mount Tab Centerline
44 in. Wide
15 in. Chord Length
Includes Outer Tip Plates
Made in the USA See Product Details
C42-144-BT-15
44 in. REAR WING B TIP PLATES 15 in. Mount Tab Centerline
44 in. Wide
15 in. Chord Length
Includes Outer Tip Plates
Made in the USA See Product Details
C42-144-BT-1714
44 in. REAR WING B TIP PLATES 17-1/4 in. Mount Tab Centerline
44 in. Wide
15 in. Chord Length
Includes Outer Tip Plates
Made in the USA See Product Details
C42-144-CT-15
44 in. REAR WING C TIP PLATES 15 in. Mount Tab Centerline
44 in. Wide
15 in. Chord Length
Includes Outer Tip Plates
Made in the USA See Product Details
C42-144-CT-1714
44 in. REAR WING C TIP PLATES 17-1/4 in. Mount Tab Centerline
44 in. Wide
15 in. Chord Length
Includes Outer Tip Plates
Made in the USA See Product Details
C42-144-DT-15
44 in. REAR WING D TIP PLATES 15 in. Mount Tab Centerline
44 in. Wide
15 in. Chord Length
Includes Outer Tip Plates
Made in the USA See Product Details
C42-144-DT-1714
44 in. REAR WING D TIP PLATES 17-1/4 in. Mount Tab Centerline
44 in. Wide
15 in. Chord Length
Includes Outer Tip Plates
Made in the USA See Product Details
C42-144-ET-15
44 in. REAR WING E TIP PLATES 15 in. Mount Tab Centerline
44 in. Wide
15 in. Chord Length
Includes Outer Tip Plates
Made in the USA See Product Details
C42-144-ET-1714
44 in. REAR WING E TIP PLATES 17-1/4 in. Mount Tab Centerline
44 in. Wide
15 in. Chord Length
Includes Outer Tip Plates
Made in the USA See Product Details
C42-144-FT-15
44 in. REAR WING F TIP PLATES 15 in. Mount Tab Centerline
44 in. Wide
15 in. Chord Length
Includes Outer Tip Plates
Made in the USA See Product Details
C42-144-FT-1714
44 in. REAR WING F TIP PLATES 17-1/4 in. Mount Tab Centerline
44 in. Wide
15 in. Chord Length
Includes Outer Tip Plates
Made in the USA See Product Details
C42-148-AT-15
48 in. REAR WING A TIP PLATES 15 in. Mount Tab Centerline
48 in. Wide
15 in. Chord Length
Includes Outer Tip Plates
Made in the USA See Product Details
C42-148-AT-18
48 in. REAR WING A TIP PLATES 18 in. Mount Tab Centerline
48 in. Wide
15 in. Chord Length
Includes Outer Tip Plates
Made in the USA See Product Details
C42-148-BT-15
48 in. REAR WING B TIP PLATES 15 in. Mount Tab Centerline
48 in. Wide
15 in. Chord Length
Includes Outer Tip Plates
Made in the USA See Product Details
C42-148-BT-18
48 in. REAR WING B TIP PLATES 18 in. Mount Tab Centerline
48 in. Wide
15 in. Chord Length
Includes Outer Tip Plates
Made in the USA See Product Details
C42-148-CT-15
48 in. REAR WING C TIP PLATES 15 in. Mount Tab Centerline
48 in. Wide
15 in. Chord Length
Includes Outer Tip Plates
Made in the USA See Product Details
C42-148-CT-18
48 in. REAR WING C TIP PLATES 18 in. Mount Tab Centerline
48 in. Wide
15 in. Chord Length
Includes Outer Tip Plates
Made in the USA See Product Details
C42-148-DT-15
48 in. REAR WING D TIP PLATES 15 in. Mount Tab Centerline
48 in. Wide
15 in. Chord Length
Includes Outer Tip Plates
Made in the USA See Product Details
C42-148-DT-18
48 in. REAR WING D TIP PLATES 18 in. Mount Tab Centerline
48 in. Wide
15 in. Chord Length
Includes Outer Tip Plates
Made in the USA See Product Details
C42-148-ET-15
48 in. REAR WING E TIP PLATES 15 in. Mount Tab Centerline
48 in. Wide
15 in. Chord Length
Includes Outer Tip Plates
Made in the USA See Product Details
C42-148-ET-18
48 in. REAR WING E TIP PLATES 18 in. Mount Tab Centerline
48 in. Wide
15 in. Chord Length
Includes Outer Tip Plates
Made in the USA See Product Details
C42-148-FT-15
48 in. REAR WING F TIP PLATES 15 in. Mount Tab Centerline
48 in. Wide
15 in. Chord Length
Includes Outer Tip Plates
Made in the USA See Product Details
C42-148-FT-18
48 in. REAR WING F TIP PLATES 18 in. Mount Tab Centerline
48 in. Wide
15 in. Chord Length
Includes Outer Tip Plates
Made in the USA See Product Details
C42-156-A
"A" OUTER TIP PLATE SET, FRONT WING/CANARD Includes (10) 1/2 in. 10-24 Thread Button Head Cap Screws
Made in the USA See Product Details
C42-156-B
"B" OUTER TIP PLATE SET, FRONT WING/CANARD Includes (10) 1/2 in. 10-24 Thread Button Head Cap Screws
Made in the USA See Product Details
C42-156-C
"C" OUTER TIP PLATE SET, FRONT WING/CANARD Includes (10) 1/2 in. 10-24 Thread Button Head Cap Screws
Made in the USA See Product Details
C42-158-A
"A" INNER TIP PLATE SET, FRONT WING/CANARD Includes (10) 1/2 in. 10-24 Thread Button Head Cap Screws
Made in the USA See Product Details
C42-158-B
"B" INNER TIP PLATE SET, FRONT WING/CANARD Includes (10) 1/2 in. 10-24 Thread Button Head Cap Screws
Made in the USA See Product Details
C42-158-C
"C" INNER TIP PLATE SET, FRONT WING/CANARD Includes (10) 1/2 in. 10-24 Thread Button Head Cap Screws
Made in the USA See Product Details
C42-160-A
"A" TIP PLATE SET, REAR WING 3/32 in. THICK Includes (16) 1/2 in. 10-24 Thread Button Head Cap Screws
Made in the USA See Product Details
C42-160-A-1-8
"A" TIP PLATE SET, REAR WING 1/8 in. THICK Includes (16) 1/2 in. 10-24 Thread Button Head Cap Screws
Made in the USA See Product Details
C42-160-B
"B" TIP PLATE SET, REAR WING 3/32 in. THICK Includes (16) 1/2 in. 10-24 Thread Button Head Cap Screws
Made in the USA See Product Details
C42-160-B-1-8
"B" TIP PLATE SET, REAR WING 1/8 in. THICK Includes (16) 1/2 in. 10-24 Thread Button Head Cap Screws
Made in the USA See Product Details
C42-160-C
"C" TIP PLATE SET, REAR WING 3/32 in. THICK Includes (16) 1/2 in. 10-24 Thread Button Head Cap Screws
Made in the USA See Product Details
C42-160-C-1-8
"C" TIP PLATE SET, REAR WING 1/8 in. THICK Includes (16) 1/2 in. 10-24 Thread Button Head Cap Screws
Made in the USA See Product Details
C42-160-D
"D" TIP PLATE SET, REAR WING 3/32 in. THICK Includes (16) 1/2 in. 10-24 Thread Button Head Cap Screws
Made in the USA See Product Details
C42-160-D-1-8
"D" TIP PLATE SET, REAR WING 1/8 in. THICK Includes (16) 1/2 in. 10-24 Thread Button Head Cap Screws
Made in the USA See Product Details
C42-160-E
"E" TIP PLATE SET, REAR WING 3/32 in. THICK Includes (16) 1/2 in. 10-24 Thread Button Head Cap Screws
Made in the USA See Product Details
C42-160-E-1-8
"E" TIP PLATE SET, REAR WING 1/8 in. THICK Includes (16) 1/2 in. 10-24 Thread Button Head Cap Screws
Made in the USA See Product Details
C42-160-F
"F" TIP PLATE SET, REAR WING 3/32 in. THICK Includes (16) 1/2 in. 10-24 Thread Button Head Cap Screws
Made in the USA See Product Details
C42-160-F-1-8
"F" TIP PLATE SET, REAR WING 1/8 in. THICK Includes (16) 1/2 in. 10-24 Thread Button Head Cap Screws
Made in the USA See Product Details
C73-377
PRO-GRIP DUAL FULL CLAMP, SILVER
Holds two push / pull " CLIP TYPE " Cables

A classy upgrade alternative to the dual flip latch type mount
Mounts with two # 10 fasteners
CNC machined of Billet Aluminum
Anodized for durability

Made in the USA

 See Product Details
C73-410
BLACK ALUMINUM EZ GRIP KNOB 10-32 NF THREAD 10-32 NF Right Hand Threads

Precision CNC machined of Billet Aluminum
Anodized for durability

Made in the USA See Product Details
C73-415
BLACK ALUMINUM EZ GRIP KNOB 1/4-20 NC THREAD
1/4-20 NC Right Hand Threads

Precision CNC machined of Billet Aluminum
Anodized for durability

Made in the USA

 See Product Details
C73-440
UNI-BALL WELD CUP, 13/16" ROD END INSERT Snap ring is included.

Welding causes distortion.
Installing a removable, snug fitting " heat sink " into the bore is recommended during the finish welding process.

Made in the USA See Product Details
C73-441
UNI-BALL WELD CUP, 1" ROD END INSERT Snap ring is included.

Welding causes distortion.
Installing a removable, snug fitting " heat sink " into the bore is recommended during the finish welding process.

Made in the USA See Product Details
C73-442
UNI-BALL WELD CUP, 1-3/16" ROD END INSERT Snap ring is included.

Welding causes distortion.
Installing a removable, snug fitting " heat sink " into the bore is recommended during the finish welding process.

Made in the USA See Product Details
C73-443
UNI-BALL WELD CUP, 1-7/16" ROD END INSERT Snap ring is included.

Welding causes distortion.
Installing a removable, snug fitting " heat sink " into the bore is recommended during the finish welding process.

Made in the USA See Product Details
C73-450-2
(2) INTERNAL SNAP RINGS
GROOVE SIZE 0.862 in. DIA X 0.046 in. WIDTH

(REPLACEMENT CLIP FOR C73-440) See Product Details
C73-451-2
(2) INTERNAL SNAP RINGS
GROOVE SIZE 1.066 in. DIA X 0.046 in. WIDTH

(REPLACEMENT CLIP FOR C73-441) See Product Details
C73-452-2
(2) INTERNAL SNAP RINGS
GROOVE SIZE 1.262 in. DIA X 0.056 in. WIDTH

(REPLACEMENT CLIP FOR C73-442) See Product Details
C73-453-2
(2) INTERNAL SNAP RINGS
GROOVE SIZE 1.528 in. DIA X 0.056 in. WIDTH

(REPLACEMENT CLIP FOR C73-443) See Product Details
C73-745-L
1-5/8 in. STEEL WELD BUNG, 1 in. TALL 1-1/4-12 Straight Thread
1-1/2 in. Outside Diameter Bung
1 in. Bung Height

Fits 1-5/8 in. Easy Turn Fill Caps

Made in the USA See Product Details
C73-745-XL
1-5/8 in. STEEL WELD BUNG, 2 in. TALL 1-1/4-12 Straight Thread
1-1/2 in. Outside Diameter Bung
2 in. Bung Height

Fits 1-5/8 in. Easy Turn Fill Caps

Made in the USA See Product Details
C73-747-L
1-5/8 in. ALUMINUM WELD BUNG, 1 in. TALL 1-1/4-12 Straight Thread
1-5/8 in. Outside Diameter Bung
1 in. Bung Height

Fits 1-5/8 in. Easy Turn Fill Caps

Made in the USA See Product Details
C73-747-XL
1-5/8 in. ALUMINUM WELD BUNG, 2 in. TALL 1-1/4-12 Straight Thread
1-5/8 in. Outside Diameter Bung
2 in. Bung Height

Fits 1-5/8 in. Easy Turn Fill Caps

Made in the USA See Product Details
C73-755-H2
2 in. BLACK CAP W/ ALUMINUM REMOTE MOUNT BUNG, 2 in. HOSE 1-1/2-12 Straight Thread
4 on 2.75 in. Dia. Bolt Circle
9/16 in. Bung Height

Includes mounting hardware and Buna O-ring.

Made in the USA

(Cap Replacement O-Ring is C73-769) See Product Details
C73-756-H2
2 in. RED CAP W/ ALUMINUM REMOTE MOUNT BUNG, 2 in. HOSE 1-1/2-12 Straight Thread
4 on 2.75 in. Dia. Bolt Circle
9/16 in. Bung Height

Includes mounting hardware and Buna O-ring.

Made in the USA

(Cap Replacement O-Ring is C73-769) See Product Details
C73-757-H2
2 in. BLUE CAP W/ ALUMINUM REMOTE MOUNT BUNG, 2 in. HOSE 1-1/2-12 Straight Thread
4 on 2.75 in. Dia. Bolt Circle
9/16 in. Bung Height

Includes mounting hardware and Buna O-ring.

Made in the USA

(Cap Replacement O-Ring is C73-769) See Product Details
C73-759-H2
2 in. POLISHED CAP W/ ALUMINUM REMOTE MOUNT BUNG, 2 in. HOSE 1-1/2-12 Straight Thread
4 on 2.75 in. Dia. Bolt Circle
9/16 in. Bung Height

Includes mounting hardware and Buna O-ring.

Made in the USA

(Cap Replacement O-Ring is C73-769) See Product Details
C73-765-L
2 in. STEEL WELD BUNG, 1 in. TALL 1-1/2-12 Straight Thread
1-3/4 in. Outside Diameter Bung
1 in. Bung Height

Fits 2 in. Easy Turn Fill Caps

Made in the USA See Product Details
C73-765-XL
2 in. STEEL WELD BUNG, 2 in. TALL 1-1/2-12 Straight Thread
1-3/4 in. Outside Diameter Bung
2 in. Bung Height

Fits 2 in. Easy Turn Fill Caps

Made in the USA See Product Details
C73-767-L
2 in. ALUMINUM WELD BUNG, 1 in. TALL 1-1/2-12 Straight Thread
2 in. Outside Diameter Bung
1 in. Bung Height

Fits 2 in. Easy Turn Fill Caps

Made in the USA See Product Details
C73-767-XL
2 in. ALUMINUM WELD BUNG, 2 in. TALL 1-1/2-12 Straight Thread
2 in. Outside Diameter Bung
2 in. Bung Height

Fits 2 in. Easy Turn Fill Caps

Made in the USA See Product Details
C73-775-H2
2-3/4 in. BLACK CAP W/ ALUMINUM REMOTE MOUNT BUNG, 2 in. HOSE 2-1/4-10 Straight Thread
4 on 3.25 in. Dia. Bolt Circle
11/16 in. Bung Height

Includes mounting hardware and Buna O-ring.

This cap will not accept a lanyard chain.

(Cap Replacement O-Ring is C73-788) See Product Details
C73-776-H2
2-3/4 in. RED CAP W/ ALUMINUM REMOTE MOUNT BUNG, 2 in. HOSE 2-1/4-10 Straight Thread
4 on 3.25 in. Dia. Bolt Circle
11/16 in. Bung Height

Includes mounting hardware and Buna O-ring.

This cap will not accept a lanyard chain.

(Cap Replacement O-Ring is C73-788) See Product Details
C73-777-H2
2-3/4 in. BLUE CAP W/ ALUMINUM REMOTE MOUNT BUNG, 2 in. HOSE 2-1/4-10 Straight Thread
4 on 3.25 in. Dia. Bolt Circle
11/16 in. Bung Height

Includes mounting hardware and Buna O-ring.

This cap will not accept a lanyard chain.

(Cap Replacement O-Ring is C73-788) See Product Details
C73-779-H2
2-3/4 in. POLISHED CAP W/ ALUMINUM REMOTE MOUNT BUNG, 2 in. HOSE 2-1/4-10 Straight Thread
4 on 3.25 in. Dia. Bolt Circle
11/16 in. Bung Height

Includes mounting hardware and Buna O-ring.

This cap will not accept a lanyard chain.

(Cap Replacement O-Ring is C73-788) See Product Details
C73-792
2 in. ALUMINUM REMOTE MOUNT BUNG, 2 in. HOSE 1-1/2-12 Straight Thread
4 on 2.75 in. Bolt Circle
9/16 in. Bung Height

Includes mounting hardware

Fits 2 in. Easy Turn Fill Cap

Made in the USA See Product Details
C73-794
2-3/4 in. ALUMINUM REMOTE MOUNT BUNG, 2 in. HOSE 2-1/4-10 Straight Thread
4 on 3.25 in. Dia. Bolt Circle
11/16 in. Bung Height

Includes mounting hardware

Fits 2 3/4" Easy Turn Fill Cap

This Bung will not accept a Lanyard Boss Cap

Made in the USA See Product Details
C76-582-SS-2
(2) STRAIGHT EXHAUST 1-3/8" OD, 16GA 304 STAINLESS Outside Diameter: 1-3/8
Wall Thickness: 16 Gauge
 See Product Details
C76-584-2
(2) STRAIGHT EXHAUST 1-1/2" OD, 16GA MILD STEEL Outside Diameter: 1-1/2
Wall Thickness: 16 Gauge
 See Product Details
C76-586-2
(2) STRAIGHT EXHAUST 1-5/8" OD, 16GA MILD STEEL Outside Diameter: 1-5/8
Wall Thickness: 16 Gauge
 See Product Details
C76-588-SS-2
(2) STRAIGHT EXHAUST 1-3/4" OD, 16GA 304 STAINLESS Outside Diameter: 1-3/4
Wall Thickness: 16 Gauge
 See Product Details
C76-590-2
(2) STRAIGHT EXHAUST 1-7/8" OD, 18GA MILD STEEL Outside Diameter: 1-7/8
Wall Thickness: 18 Gauge
 See Product Details
C76-592-2
(2) STRAIGHT EXHAUST 2" OD, 16GA MILD STEEL Outside Diameter: 2
Wall Thickness: 16 Gauge
 See Product Details
C76-592-SS-2
(2) STRAIGHT EXHAUST 2" OD, 16GA 304 STAINLESS Outside Diameter: 2
Wall Thickness: 16 Gauge
 See Product Details
C76-596-2
(2) STRAIGHT EXHAUST 2-1/4" OD, 16GA MILD STEEL Outside Diameter: 2-1/4
Wall Thickness: 16 Gauge
 See Product Details
C76-596-SS-2
(2) STRAIGHT EXHAUST 2-1/4" OD, 16GA 304 STAINLESS Outside Diameter: 2-1/4
Wall Thickness: 16 Gauge
 See Product Details
C76-600-2
(2) STRAIGHT EXHAUST 3" OD, 16GA MILD STEEL Outside Diameter: 3
Wall Thickness: 16 Gauge
 See Product Details
C76-600-SS-2
(2) STRAIGHT EXHAUST 3" OD, 16GA 304 STAINLESS Outside Diameter: 3
Wall Thickness: 16 Gauge
 See Product Details
 
 
 
;