All Pro-Werks Parts

Image	Part Number	Description
	C12-300	POWERGLIDE TO VW ADAPTER PLATE 24 in. WIDE 24 in. TALL 0.250 in. THICK ALUMINUM
	C32-110	BOLT-ON PEDAL STOP KIT Made in the USA
	C42-014	STANDARD WIDTH WINDSCREEN (Clear) 17 in. Wide at bottom edge 14 in. Wide at top edge 7 in. Tall 33 in. Long Dimensions are as formed and may be flexed slightly on installation Made in the USA
	C42-015	STANDARD WIDTH WINDSCREEN (Tinted) 17 in. Wide at bottom edge 14 in. Wide at top edge 7 in. Tall 33 in. Long Dimensions are as formed and may be flexed slightly on installation Made in the USA
	C42-016	NACA DUCT 3 in. Hand Laid Fiberglass 3 in. Wide 6-1/2 in. Long 7/8 in. Inlet Depth Made in the USA
	C42-017	NACA DUCT 4 in. Hand Laid Fiberglass 4 in. Wide 9 in. Long 1 in. Inlet Depth Made in the USA
	C42-020	STANDARD WIDTH - TALL WINDSCREEN (Clear) 17 in. Wide at bottom edge 14 in. Wide at top edge 9 in. Tall 33 in. Long Dimensions are as formed and may be flexed slightly on installation Made in the USA
	C42-021	STANDARD WIDTH - TALL WINDSCREEN (Tinted) 17 in. Wide at bottom edge 14 in. Wide at top edge 9 in. Tall 33 in. Long Dimensions are as formed and may be flexed slightly on installation Made in the USA
	C42-022	ECONO DRAGSTER NOSE Hand Laid Fiberglass 8-1/2 in. Wide 8-1/2 in. Tall at Back 25 in. Long Made in the USA
	C42-023	FUEL DRAGSTER NOSE LONG Hand Laid Fiberglass 11-3/4 in. Wide 8-1/2 in. Tall at Back 28 in. Long Made in the USA
	C42-024	WIDE WIDTH WINDSCREEN (Clear) 20 in. Wide at bottom edge 17 in. Wide at top edge 10 in. Tall 33 in. Long Dimensions are as formed and may be flexed slightly on installation Made in the USA
	C42-025	WIDE WIDTH WINDSCREEN (Tinted) 20 in. Wide at bottom edge 17 in. Wide at top edge 10 in. Tall 33 in. Long Dimensions are as formed and may be flexed slightly on installation Made in the USA
	C42-026	JUNIOR WIDTH WINDSCREEN (Clear) 14 in. Wide at bottom edge 12 in. Wide at top edge 6 in. Tall 25 in. Long Dimensions are as formed and may be flexed slightly on installation Made in the USA
	C42-027	JUNIOR WIDTH WINDSCREEN (Tinted) 14 in. Wide at bottom edge 12 in. Wide at top edge 6 in. Tall 25 in. Long Dimensions are as formed and may be flexed slightly on installation Made in the USA
	C42-030	NACA DUCT 7 in. Hand Laid Fiberglass 7 in. Wide 14 in. Long 2 in. Inlet Depth Made in the USA
	C42-036	5/8 in. STEERING SHAFT KIT WITH C52-220 4 BOLT HUB
	C42-070	14 in. PEDAL SHAFT 5/8 in. Diameter Aircraft Aluminum Vibratory satin finish Made in the USA
	C42-071	15 in. PEDAL SHAFT 5/8 in. Diameter Aircraft Aluminum Vibratory satin finish Made in the USA
	C42-072	16 in. PEDAL SHAFT 5/8 in. Diameter Aircraft Aluminum Vibratory satin finish Made in the USA
	C42-073	17 in. PEDAL SHAFT 5/8 in. Diameter Aircraft Aluminum Vibratory satin finish Made in the USA
	C42-074	18 in. PEDAL SHAFT 5/8 in. Diameter Aircraft Aluminum Vibratory satin finish Made in the USA
	C42-075	19 in. PEDAL SHAFT 5/8 in. Diameter Aircraft Aluminum Vibratory satin finish Made in the USA
	C42-076	20 in. PEDAL SHAFT 5/8 in. Diameter Aircraft Aluminum Vibratory satin finish Made in the USA
	C42-080	DRAGSTER PEDAL KIT WITH 14 in. SHAFT Made in the USA
	C42-081	DRAGSTER PEDAL KIT WITH 15 in. SHAFT Made in the USA
	C42-082	DRAGSTER PEDAL KIT WITH 16 in. SHAFT Made in the USA
	C42-083	DRAGSTER PEDAL KIT WITH 17 in. SHAFT Made in the USA
	C42-084	DRAGSTER PEDAL KIT WITH 18 in. SHAFT Made in the USA
	C42-085	DRAGSTER PEDAL KIT WITH 19 in. SHAFT Made in the USA
	C42-086	DRAGSTER PEDAL KIT WITH 20 in. SHAFT Made in the USA
	C42-091	GAS PEDAL With Nylon Bushings installed. Made in the USA
	C42-092	BRAKE PEDAL 4.5:1 PEDAL RATIO With Nylon Bushings installed. Made in the USA
	C42-094-4	(4) EXTERNAL SNAP RINGS GROOVE SIZE 0.588 in. DIA X 0.056 in. WIDTH (fits pedal cross shaft)
	C42-095-2	(2) 5/8 in. ID NYLON BUSHINGS Fits 7/8 in. OD x 0.049 in. wall tube 3/4 in. Outside Diameter 1 in. Long Made in the USA
	C42-096-2	(2) 3/4 in. ID NYLON BUSHINGS Fits 1 in. OD x 0.049 in. wall tube 7/8 in. Outside Diameter 1 in. Long Made in the USA
	C42-110	WELD-ON PEDAL STOP KIT Made in the USA
	C42-180	WING STRUT ADJUSTER 7-3/4 in. LONG ALUMINUM TAPPED 3/8-24 RH & 5/16-24 LH
	C42-182	WING STRUT ADJUSTER KIT WITH ROD ENDS & CLEVIS
	C42-200	ROUND WING STRUT KIT DRAGSTER (UNWELDED)
	C42-202	ROUND WING STRUT KIT ALTERED (UNWELDED)
	C42-274	JR DRAG 6 POINT PRE BENT CAGE 1-1/8 x 0.065 4130N 1-1/8 x 0.065 4130N 5-1/2 in. Bend Radius
	C42-275	6 POINT PRE BENT CAGE 1-1/2 x 0.083 4130N 1-1/2 x 0.083 4130N 6 in. Bend Radius
	C42-276	6 POINT PRE BENT CAGE 1-5/8 x 0.083 4130N 1-5/8 x 0.083 4130N 7 in. Bend Radius
	C42-279	HEADBAR KIT 1 x 0.058 4130N 1 x 0.058 4130N 2 Pieces 6 in. Straight Leg 18 in. Straight Leg 90° Bend Angle
	C42-280	SHOULDER HOOP 1-3/8 x 0.058 4130N 1-3/8 x 0.058 4130N 20-1/2 in. Centers 72 in. Long
	C42-283	JUNIOR DRAGSTER SHOULDER HOOP 1-1/8 in. x 0.058 4130N 1-1/8 in. x 0.058 4130N 17-1/2 in. Centers 60 in. Long
	C42-286	(PAIR) SEAT BARS 1-1/4 in. X 0.058 4130N 1-1/4 in. X 0.058 4130N 20° Bend Angle
	C42-288	(PAIR) SEAT BARS JUNIOR DRAGSTER 1-1/8 in. X 0.065 4130N 1-1/8 in. X 0.065 4130N 25° Bend Angle
	C42-292	BENT BACK BAR 1-1/2 in. x 0.083 4130N 1-1/2 in. x 0.083 4130N 17 in. Tall 15 in. Deep 80° Bend Angle 6 in. Bend Radius
	C42-296	BENT BACK BAR 1-5/8 in. x 0.083 4130N 1-5/8 in. x 0.083 4130N 17 in. Tall 15 in. Deep 80° Bend Angle 7 in. Bend Radius
	C42-297	6 POINT JUNIOR DRAGSTER BENT FRONT HOOP 1-1/8 in. x 0.065 4130N 1-1/8 in. x 0.065 4130N DOUBLE BEND 21 in. Tall 17 in. Centers 5-1/2 in. Bend Radius
	C42-298	6 POINT JUNIOR DRAGSTER BENT INTERMEDIATE HOOP 1-1/8 in. x 0.065 4130N Double Bend 17 in. Tall 18 in. Centers 5-1/2 in. Bend Radius
	C42-299	JUNIOR DRAGSTER BENT BACK BAR 1-1/8 in. x 0.065 4130N 1-1/8 in. x 0.065 4130N 16 in. Tall 13 in. Deep 80° Bend Angle 5-1/2 in. Bend Radius
	C42-302	6 POINT BENT FRONT HOOP 1-1/2 in. x 0.083 4130N 1-1/2 in. x 0.083 4130N Double Bend 26 in. Tall 20 in. Centers 6 in. Bend Radius
	C42-303	6 POINT BENT INTERMEDIATE HOOP 1-1/2 in. x 0.083 1-1/2 in. x 0.083 4130N Double Bend 22 in. Tall 21 in. Centers 6 in. Bend Radius
	C42-306	6 POINT BENT FRONT HOOP 1-5/8 in. x 0.083 4130N 1-5/8 in. x 0.083 4130N Double Bend 26 in. Tall 20 in. Centers 7 in. Bend Radius
	C42-307	6 POINT BENT INTERMEDIATE HOOP 1-5/8 in. x 0.083 4130N 1-5/8 in. x 0.083 4130N Double Bend 22 in. Tall 21 in. Centers 7 in. Bend Radius
	C42-320	1-1/2 in. 6 POINT BENT PACKAGE 4130 Cage Kit: 1-1/2 in. x 0.083 Shoulder Hoop: 1-3/8 in. x 0.058 Seat Formers: 1-1/4 in. x 0.058
	C42-323	1-5/8 in. 6 POINT BENT PACKAGE 4130 Cage Kit: 1-5/8 in. x 0.083 Shoulder Hoop: 1-3/8 in. x 0.058 Seat Formers: 1-1/4 in. x 0.058
	C42-326	1-1/8 in. 6 POINT JUNIOR DRAGSTER BENT PACKAGE 4130 Cage Kit: 1-1/8 in. x 0.065 Shoulder Hoop: 1-1/8 in. x 0.065 Seat Formers: 1-1/8 in. x 0.065
	C42-330	STILETTO DWARF / MOD-LITE RACK N PINION 10:1 RATIO 10:1 Ratio Horizontal Bolt Centerline 5/8-36 Splined Pinion 1/2 in. Clevis Holes
	C42-332	STILETTO GEN 2 PRO BOX RACK N PINION 20:1 RATIO 20:1 Ratio Accepts 7/16 in. Rod Ends. 9/16-26 Splined Pinion Made in the USA Currently SOLD OUT. We are re-tooling the next generation of this item for production.
	C42-339	STILETTO GEN5 RACK N PINION 12:1 RATIO 12:1 Ratio Vertical Bolt Centerline 3/8 in. Rod Ends 5/8-36 Splined Pinion Made in the USA The NEW Gen5 release is now available.
	C42-340	STILETTO GEN5 RACK N PINION 12:1 RATIO 12:1 Ratio Horizontal Bolt Centerline 3/8 in. Rod Ends 5/8-36 Splined Pinion Made in the USA The NEW Gen5 release is now available.
	C42-344	STILETTO GEN5 RACK N PINION 15:1 RATIO 15:1 Ratio Vertical Bolt Centerline 3/8 in. Rod Ends 5/8-36 Splined Pinion Made in the USA The NEW Gen5 release is now available.
	C42-348	STILETTO GEN5 RACK N PINION 20:1 RATIO 20:1 Ratio Vertical Bolt Centerline 3/8 in. Rod Ends 9/16-26 Splined Pinion Made in the USA The NEW Gen5 release is now available.
	C42-350	5/8 in. ANTI PUSH BACK Fits 5/8 in. outsdie diameter steering shaft. Made in the USA
	C42-351	3/4 in. ANTI PUSH BACK Fits 3/4 in. outsdie diameter steering shaft. Made in the USA
	C42-352	STILETTO BOOTS (2) WITH WIRES (4) FITS SMALL BOX RACK & PINIONS Nylon reinforced neoprene 1 3/4 " OD 1 " ID 11 Peaks Made in the USA
	C42-354	STILETTO SPLIT BOLT COUPLER 9/16-26 SPLINE, 3/4" BORE Spline is correctly sized to fit the Stiletto Pro-box, C42-348 & Pinto OEM style rack 9/16-26 female spline 3/4 in. bored inside diameter Machined from 1018 mild steel Made in the USA
	C42-355	STILETTO SPLIT BOLT COUPLER 5/8-36 SPLINE, 5/8" BORE Spline is correctly sized to fit the Stiletto 5/8-36 spline pinion 5/8-36 female spline 5/8 in. bored inside diameter Machined from 1018 mild steel Made in the USA
	C42-356	STILETTO BOOTS (2) WITH WIRES (4) FITS DWARF RACK & PINION Nylon reinforced neoprene 2 1/4 " OD 1 1/2 " ID 9 Peaks Made in the USA
	C42-357	STILETTO BOOTS (2) WITH WIRES (4) Fits C42-332 PRO RACK & PINION Nylon reinforced neoprene 2 1/8 " OD 1 1/4 " ID 11 Peaks Made in the USA
	C42-359	STILETTO SERVICE LUBE FOR RACK N PINIONS Includes specially formulated assembly lube, and boot wires.
	C42-365	5/8 BORED X 5/8 BORED U JOINT 5/8 in. bored inside diameter on both ends. Made in the USA
	C42-366	3/4 BORED X 3/4 BORED U JOINT 3/4 in. bored inside diameter on both ends. Made in the USA
	C42-368	9/16-26 X 3/4 BORED U JOINT Spline is correctly sized to fit the Stiletto Pro-box,C42-348 & Pinto style rack 9/16-26 female spline 3/4 in. bored inside diameter 1/4-28 NF set screws on splined end Made in the USA
	C42-370	5/8-36 X 3/4 BORED U JOINT Spline is correctly sized to fit the Stiletto 5/8-36 pinion 5/8-36 female spline 3/4 in. bored inside diameter 1/4-28 NF set screws on splined end Made in the USA
	C42-400	PINTO RACK N PINION 24.74:1 Ratio 9/16 in.-26 Spline
	C42-403	DUAL LOCK SPLINED COUPLER 9/16-26 SPLINE, 3/4" BORE Spline is correctly sized for Stiletto Pro-box, C42-348 & Pinto style rack. Screws are at 90 deg. for positive lock. 9/16-26 female spline 3/4 in. bored inside diameter Machined from 4130N Chromoly Made in the USA
	C42-404	PINTO RACK BRACKET
	C42-405	PINTO RACK BRACKET KIT WITH WELD-ON BRACKETS
	C42-420	3/4 in. DIA TIE ROD KIT (2) 18 in. Long 3/4 in. Outside Diameter Tubes (2) CM-6 (3/8 in) ROD ENDS
	C42-421	7/8 in. DIA TIE ROD KIT (2) 20 in. Long 7/8 in. Outside Diameter Tubes (2) CM-7 (7/16 in) ROD ENDS
	C42-425	PINTO TIE ROD KIT
	C42-427	LATERAL LIMITER KIT UNIVERSAL Complete Kit as shown Requires welding Made in the USA
	C42-429	GLIDE TO 9 in. LIMITER KIT Complete Kit as shown Requires welding Made in the USA
	C42-430	GLIDE BRACKET ONLY FITS GM POWERGLIDE TRANSMISSION WITH SHORTY KIT Made in the USA
	C42-431	9 in. RETAINER BRACKET ONLY FITS FORD 9" REAR END WITH OEM PINION BEARING RETAINER Made in the USA
	C42-437	39 in. FRONT AXLE SPE 39 in. Wide 6 in. Drop 6 in. Flat SPE Bosses 1-1/2 in. Outside Diameter, 0.120 in. wall 4130 Chromoly Tubing
	C42-438	36 in. FRONT AXLE SPE 36 in. Wide 6 in. Drop 6 in. Flat SPE Bosses 1-1/2 in. Outside Diameter, 0.120 in. wall 4130 Chromoly Tubing
	C42-439	40 in. FRONT AXLE SPE 40 in. Wide 40 in. Flat SPE Bosses 1-5/8 in. Outside Diameter, 0.120 in. wall 4130 Chromoly Tubing
	C42-443	DRAGSTER 3 BAR KIT STILETTO 3/4 in. TUBE Stiletto Bosses
	C42-444	FRONT ENGINE 3 BAR KIT STILETTO 7/8 in. TUBE Stiletto Bosses
	C42-445	DRAGSTER 3 BAR KIT SPE 3/4 in. TUBE SPE Bosses
	C42-446	FRONT ENGINE 3 BAR KIT SPE 7/8 in. TUBE SPE Bosses
	C42-447	39 in. FRONT AXLE STILETTO 39 in. Wide 6 in. Drop 6 in. Flat Stiletto Bosses 1-1/2 in. Outside Diameter, 0.120 in. wall 4130 Chromoly Tubing
	C42-448	36 in. FRONT AXLE STILETTO 36 in. Wide 6 in. Drop 6 in. Flat Stiletto Bosses 1-1/2 in. Outside Diameter, 0.120 in. wall 4130 Chromoly Tubing
	C42-449	40 in. FRONT AXLE STILETTO 40 in. Wide 40 in. Flat Stiletto Bosses 1-5/8 in. Outside Diameter, 0.120 in. wall 4130 Chromoly Tubing
	C42-454	STILETTO CHROMOLY ULTRA SPINDLE SET Complete Set Includes: (2) Spindles (2) 5 in. x 1/4 in. Arms (2) Top Caps (2) Bosses (2) King Pins (2) Thrust Washers (2) Spindle Nuts (2) Cotter Pins (16) ARP Bolts Made in the USA
	C42-456-2	(2) STILETTO SPINDLE BOSSES 4130 Sold in a set of (2) 1.250 in. Outside Diameter 0.687 in. Inside Diameter 2 in. Long Made in the USA
	C42-457	STILETTO 5 in. CHROMOLY STEERING ARM 1/4" THICK SOLD EACH 1/4 in. Thick 5 in. Long Made in the USA
	C42-458	STILETTO 6 in. CHROMOLY STEERING ARM 1/4" THICK SOLD EACH 1/4 in. Thick 6 in. Long Made in the USA
	C42-460	STILETTO THRUST WASHER SOLD EACH Purchase (2) for a complete spindle set rebuild 0.687 in. Inside Diameter 0.095 in. Thick Made in the USA
	C42-462	STILETTO SPINDLE NUT SOLD EACH Purchase (2) for a complete spindle set rebuild 5/8-18 NF Thread
	C42-463	STILETTO KING PIN 3.00 in. LONG SOLD EACH Purchase (2) for a complete spindle set rebuild 0.687 in. Outside Diameter 3.00 in. Long (fits current version of C42-454) Made in the USA Fits Spindles produced after 1997
	C42-465	STILETTO KING PIN BUSHING SOLD EACH br/> Purchase (4) for a complete spindle set rebuild 0.782 in. Outside Diameter 0.687 in. Inside Diameter Made in the USA Fits Spindles produced after 1997
	C42-477	(2) STILETTO TOW CAPS Sold in a set of (2) Fits Stiletto Spindles Only 1/4 in. Holes 0.890 in. x 0.890 in. Bolt Pattern Made in the USA
	C42-482	BUTTERFLY STEERING WHEEL - UNDRILLED (Polished Grips on Brilliance Anodized Silver Wheel) Measures 6-5/8 in. tall X 7-1/2 in. wide. Undrilled Mounting flange area is 1.375 in. x 2.312 in. Made in the USA
	C42-482-B	BUTTERFLY STEERING WHEEL WITH TABS - UNDRILLED (Polished Grips on Brilliance Anodized Silver Wheel) Measures 6-5/8 in. tall X 7-1/2 in. wide. Undrilled Mounting flange area is 1.375 in. x 2.312 in. Made in the USA
	C42-482-B-D	BUTTERFLY STEERING WHEEL WITH TABS - DRILLED (Polished Grips on Brilliance Anodized Silver Wheel) Measures 6-5/8 in. tall X 7-1/2 in. wide. 3/16 in. Bolt Holes on a 0.750 in x 1.650 in Bolt Pattern Mounting flange area is 1.375 in. x 2.312 in. Made in the USA
	C42-482-D	BUTTERFLY STEERING WHEEL - DRILLED (Polished Grips on Brilliance Anodized Silver Wheel) Measures 6-5/8 in. tall X 7-1/2 in. wide. 3/16 in. Bolt Holes on a 0.750 in x 1.650 in Bolt Pattern Mounting flange area is 1.375 in. x 2.312 in. Made in the USA
	C42-484	BUTTERFLY STEERING WHEEL - UNDRILLED (Red Grips on Brilliance Anodized Silver Wheel) Measures 6-5/8 in. tall X 7-1/2 in. wide. Undrilled Mounting flange area is 1.375 in. x 2.312 in. Made in the USA
	C42-484-B	BUTTERFLY STEERING WHEEL WITH TABS - UNDRILLED (Red Grips on Brilliance Anodized Silver Wheel) Measures 6-5/8 in. tall X 7-1/2 in. wide. Undrilled Mounting flange area is 1.375 in. x 2.312 in. Made in the USA
	C42-484-B-D	BUTTERFLY STEERING WHEEL WITH TABS - DRILLED (Red Grips on Brilliance Anodized Silver Wheel) Measures 6-5/8 in. tall X 7-1/2 in. wide. 3/16 in. Bolt Holes on a 0.750 in x 1.650 in Bolt Pattern Mounting flange area is 1.375 in. x 2.312 in. Made in the USA
	C42-484-D	BUTTERFLY STEERING WHEEL - DRILLED (Red Grips on Brilliance Anodized Silver Wheel) Measures 6-5/8 in. tall X 7-1/2 in. wide. 3/16 in. Bolt Holes on a 0.750 in x 1.650 in Bolt Pattern Mounting flange area is 1.375 in. x 2.312 in. Made in the USA
	C42-486	BUTTERFLY STEERING WHEEL - UNDRILLED (Blue Grips on Brilliance Anodized Silver Wheel) Measures 6-5/8 in. tall X 7-1/2 in. wide. Undrilled Mounting flange area is 1.375 in. x 2.312 in. Made in the USA
	C42-486-B	BUTTERFLY STEERING WHEEL WITH TABS - UNDRILLED (Blue Grips on Brilliance Anodized Silver Wheel) Measures 6-5/8 in. tall X 7-1/2 in. wide. Undrilled Mounting flange area is 1.375 in. x 2.312 in. Made in the USA
	C42-486-B-D	BUTTERFLY STEERING WHEEL WITH TABS - DRILLED (Blue Grips on Brilliance Silver Wheel) Measures 6-5/8 in. tall X 7-1/2 in. wide. 3/16 in. Bolt Holes on a 0.750 in x 1.650 in Bolt Pattern Mounting flange area is 1.375 in. x 2.312 in. Made in the USA
	C42-486-D	BUTTERFLY STEERING WHEEL - DRILLED (Blue Grips on Brilliance Anodized Silver Wheel) Measures 6-5/8 in. tall X 7-1/2 in. wide. 3/16 in. Bolt Holes on a 0.750 in x 1.650 in Bolt Pattern Mounting flange area is 1.375 in. x 2.312 in. Made in the USA
	C42-487	BUTTERFLY STEERING WHEEL - UNDRILLED (Black Grips on Brilliance Anodized Silver Wheel) Measures 6-5/8 in. tall X 7-1/2 in. wide. Undrilled Mounting flange area is 1.375 in. x 2.312 in. Made in the USA
	C42-487-B	BUTTERFLY STEERING WHEEL WITH TABS - UNDRILLED (Black Grips on Brilliance Anodized Silver Wheel) Measures 6-5/8 in. tall X 7-1/2 in. wide. Undrilled Mounting flange area is 1.375 in. x 2.312 in. Made in the USA
	C42-487-B-D	BUTTERFLY STEERING WHEEL WITH TABS - DRILLED (Black Grips on Brilliance Anodized Silver Wheel) Measures 6-5/8 in. tall X 7-1/2 in. wide. 3/16 in. Bolt Holes on a 0.750 in x 1.650 in Bolt Pattern Mounting flange area is 1.375 in. x 2.312 in. Made in the USA
	C42-487-D	BUTTERFLY STEERING WHEEL - DRILLED (Black Grips on Brilliance Anodized Silver Wheel) Measures 6-5/8 in. tall X 7-1/2 in. wide. 3/16 in. Bolt Holes on a 0.750 in x 1.650 in Bolt Pattern Mounting flange area is 1.375 in. x 2.312 in. Made in the USA
	C42-488	(2) MW TOW CAPS Sold in a set of (2) Fits MW Spindles Only 5/16 in. Holes 1.032 in. x 1.032 in. Bolt Pattern Made in the USA
	C42-489	(2) P & S TOW CAPS Sold in a set of (2) Fits P&S Spindles Only 1/4 in. Holes 0.875 in. x 0.875 in. Bolt Pattern Made in the USA
	C42-490	POLISHED BUTTERFLY WHEEL GRIPS FITS PRO-WERKS BUTTERFLY WHEEL, SET OF 4 PCS Made in the USA
	C42-491	RED BUTTERFLY WHEEL GRIPS FITS PRO-WERKS BUTTERFLY WHEEL, SET OF 4 PCS Made in the USA
	C42-492	BLUE BUTTERFLY WHEEL GRIPS FITS PRO-WERKS BUTTERFLY WHEEL, SET OF 4 PCS Made in the USA
	C42-493	BLACK BUTTERFLY WHEEL GRIPS FITS PRO-WERKS BUTTERFLY WHEEL, SET OF 4 PCS Made in the USA
	C42-507	SHUT OFF LEVER FOR 1/4" BRAKE LEVER Includes Stainless Hardware CNC machined of Billet Aluminum Micro polished finish Made in the USA Fits Pro-Werks 1/4" Thick Levers.
	C42-508	SHUT OFF LEVER FOR 5/16" BRAKE LEVER Includes Stainless Hardware CNC machined of Billet Aluminum Micro polished finish Made in the USA Fits Pro-Werks 5/16" Thick Levers.
	C42-509	CHUTE CABLE KIT Provides 3" of travel. Cut to desired finish length. Made in the USA
	C42-510	CHUTE / FUEL LEVER 5 in. Long 3/16 in. Thick 3/16 in. Diameter Holes CNC machined of Billet Aluminum Vibratory satin finish Made in the USA
	C42-512	18 in. CONTROL / BRAKE LEVER WITH POLISHED GRIPS, 1/4" THICK Polished Lever 1/4 in. Thick 18 in. Long 3/8 in. Diameter Pivot Hole Made in the USA
	C42-514	18 in. CONTROL / BRAKE LEVER WITH RED GRIPS, 1/4" THICK Polished Lever 1/4 in. Thick 18 in. Long 3/8 in. Diameter Pivot Hole Made in the USA
	C42-517	18 in. CONTROL / BRAKE LEVER WITH BLACK GRIPS, 1/4" THICK Polished Lever 1/4 in. Thick 18 in. Long 3/8 in. Diameter Pivot Hole Made in the USA
	C42-540	POLISHED GRIPS FOR 1/4" LEVER Includes 1 set of grips and Stainless hardware. Made in the USA Fits Pro-Werks 1/4" Thick Levers.
	C42-541	RED GRIPS FOR 1/4" LEVER Includes 1 set of grips and Stainless hardware. Made in the USA Fits Pro-Werks 1/4" Thick Levers.
	C42-543	BLACK GRIPS FOR 1/4" LEVER Includes 1 set of grips and Stainless hardware. Made in the USA Fits Pro-Werks 1/4" Thick Levers.
	C42-552	18 in. CONTROL / BRAKE LEVER WITH POLISHED GRIPS, 5/16" THICK Polished Lever 5/16 in. Thick 18 in. Long 3/8 in. Diameter Pivot Hole Made in the USA
	C42-554	18 in. CONTROL / BRAKE LEVER WITH RED GRIPS, 5/16" THICK Polished Lever 5/16 in. Thick 18 in. Long 3/8 in. Diameter Pivot Hole Made in the USA
	C42-557	18 in. CONTROL / BRAKE LEVER WITH BLACK GRIPS, 5/16" THICK Polished Lever 5/16 in. Thick 18 in. Long 3/8 in. Diameter Pivot Hole Made in the USA
	C42-562	20 in. CONTROL / BRAKE LEVER WITH POLISHED GRIPS, 5/16" THICK Polished Lever 5/16 in. Thick 20 in. Long 3/8 in. Diameter Pivot Hole Made in the USA
	C42-564	20 in. CONTROL / BRAKE LEVER WITH RED GRIPS, 5/16" THICK Polished Lever 5/16 in. Thick 20 in. Long 3/8 in. Diameter Pivot Hole Made in the USA
	C42-567	20 in. CONTROL / BRAKE LEVER WITH BLACK GRIPS, 5/16" THICK Polished Lever 5/16 in. Thick 20 in. Long 3/8 in. Diameter Pivot Hole Made in the USA
	C42-570	POLISHED GRIPS FOR 5/16" LEVER Includes 1 set of grips and Stainless hardware. Made in the USA Fits Pro-Werks 5/16" Thick Levers.
	C42-571	RED GRIPS FOR 5/16" LEVER Includes 1 set of grips and Stainless hardware. Made in the USA Fits Pro-Werks 5/16" Thick Levers.
	C42-573	BLACK GRIPS FOR 5/16" LEVER Includes 1 set of grips and Stainless hardware. Made in the USA Fits Pro-Werks 5/16" Thick Levers.
	C42-585-2	(2) WELD-ON SPINDLES 5/8-18 Thread Made in the USA
	C42-590	BILLET WHEEL HUB Fits Ford-Anglia style spindle Mount flange has three bolt patterns: 5 on 4-1/2", 5 on 4-3/4", 5 on 5" 1/2-20 NF Threaded stud holes Black Anodized finish Made in the USA
	C42-624	DUST CAP CHROME Fits 2.047 in. Bore Wheels and C42-590 or C42-591 Hubs
	C42-627	BEARING SEALED 2.047 in. OD 0.984 in. ID 0.590 in. Wide
	C42-700	(2) HOUSING ENDS OLDS / PONTIAC 3.150 in. Bore Precision CNC machined out of 1026 DOM Steel. Made in the USA
	C42-701	(2) HOUSING ENDS EARLY BIG FORD 3.150 in. Bore Precision CNC machined out of 1026 DOM Steel. Made in the USA
	C42-702	(2) HOUSING ENDS SMALL FORD 2.835 in. Bore Precision CNC machined out of 1026 DOM Steel. Made in the USA
	C42-703	(2) HOUSING ENDS MOPAR / DANA 2.875 in. Bore Precision CNC machined out of 1026 DOM Steel. Made in the USA
	C44-001	(2) 1/4 in. WHEEL SPACERS Includes 3 Bolt Patterns: 5 on 4-1/2 in. 5 on 4-3/4 in. 5 on 5 in. 0.702 in. Hole Diameters 3-1/16 in. Center Hole 1/4 in. Thick Hard Anodized Billet Aluminum Made in the USA
	C44-003	(2) 1/2 in. WHEEL SPACERS Features 3 Bolt Patterns: 5 on 4-1/2 in. 5 on 4-3/4 in. 5 on 5 in. 0.702 in. Hole Diameters 3-1/16 in. Center Hole 1/2 in. Thick Hard Anodized Billet Aluminum Made in the USA
	C44-005	(2) 1/4 in. WHEEL SPACERS 5 on 5-1/2 in. "Floater Axle Type" Bolt Pattern 0.702 in. Hole Diameters 3-1/2 in. Center Hole 1/4 in. Thick Hard Anodized Billet Aluminum Made in the USA
	C44-007	(2) 1/2 in. WHEEL SPACERS 5 on 5-1/2 in. "Floater Axle Type" Bolt Pattern 0.702 in. Hole Diameters 3-1/2 in. Center Hole 1/2 in. Thick Hard Anodized Billet Aluminum Made in the USA
	C44-010	(10) 1/4 in. STUD BUSHINGS 1/2 in. I.D. 1/4 in. Long Fits 0.702 in. Inside Diameter Holes Made in the USA
	C44-011	(10) 1/2 in. STUD BUSHINGS 1/2 in. I.D. 1/2 in. Long Fits 0.702 in. Inside Diameter Holes Made in the USA
	C44-013	(2) 1/4 in. WHEEL SPACERS Features 2 Bolt Patterns: 5 on 135 mm 5 on 5-1/2 in. 0.702 in. Hole Diameters 4-1/4 in. Center Hole 1/4 in. Thick Hard Anodized Billet Aluminum Made in the USA
	C44-015	(2) 1/2 in. WHEEL SPACERS Features 2 Bolt Patterns: 5 on 135 mm 5 on 5-1/2 in. 0.702 in. Hole Diameters 4-1/4 in. Center Hole 1/2 in. Thick Hard Anodized Billet Aluminum Made in the USA
	C44-017	(2) 1/4 in. WHEEL SPACERS 6 on 5-1/2 in. Bolt Pattern 0.531 in. Hole Diameters 4-1/4 in. Center Hole 1/4 in. Thick Hard Anodized Billet Aluminum Made in the USA
	C44-019	(2) 1/2 in. WHEEL SPACERS 6 on 5-1/2 in. Bolt Pattern 0.531 in. Hole Diameters 4-1/4 in. Center Hole 1/2 in. Thick Hard Anodized Billet Aluminum Made in the USA
	C44-021	(2) 1/4 in. WHEEL SPACERS Features 2 Bolt Patterns: 8 on 170 mm 8 on 6-1/2 in. 0.578 in. Hole Diameters 5-1/8 in. Center Hole 1/4 in. Thick Hard Anodized Billet Aluminum Made in the USA
	C44-023	(2) 1/2 in. WHEEL SPACERS Features 2 Bolt Patterns: 8 on 170 mm 8 on 6-1/2 in. 0.578 in. Hole Diameters 5-1/8 in. Center Hole 1/2 in. Thick Hard Anodized Billet Aluminum Made in the USA
	C52-090-2	(2) 5/8 in. ID FLANGED PLASTIC BEARINGS Fits 7/8 in. OD x 0.058 in. wall tube 3/4 in. Outside Diameter 1 in. Long
	C52-092-2	(2) 3/4 in. ID FLANGED PLASTIC BEARINGS Fits 1-1/8 in. OD x 0.058 in. wall tube 1 in. Outside Diameter 1 in. Long
	C52-094-2	(2) 7/8 in. ID FLANGED PLASTIC BEARINGS Fits 1-1/4 in. OD x 0.058 in. wall tube 1-1/8 in. Outside Diameter 1 in. Long
	C52-096-2	(2) 1 in. ID FLANGED PLASTIC BEARINGS Fits 1-3/8 in. OD x 0.058 in. wall tube 1-1/4 in. Outside Diameter 1 in. Long
	C52-098-2	(2) 1-1/4 in. ID FLANGED PLASTIC BEARINGS Fits 1-5/8 in. OD x 0.058 in. wall tube 1 -1/2 in. Outside Diameter 1 in. Long
	C52-210	3 BOLT QUICK RELEASE STEERING HUB 5/16 in. (SFI Certified) Includes 5/8 in. Bore Hex Adapter 5/16 in. Bolt Holes 3 on 1.750 in. Bolt Circle Includes Fasteners Made in the USA
	C52-220	4 BOLT QUICK RELEASE STEERING HUB (SFI Certified) Includes 5/8 in. Bore Hex Adapter 3/16 in. Bolt Holes 0.750 in. x 1.650 in. Bolt Pattern Includes Fasteners Made in the USA
	C52-230	UNDRILLED QUICK RELEASE STEERING HUB (SFI Certified) Includes 5/8 in. Bore Hex Adapter Mounting flange is undrilled Made in the USA
	C52-250	GRANT WHEEL ADAPTER FLANGE Fits C52-210 Quick Release Steering Hub 5 on 2.835 in. Outer Bolt Circle 3 on 1.750 in. Inner Bolt Circle 5/16 in. Inner Bolt Holes Made in the USA
	C52-251	9 BOLT WHEEL ADAPTER FLANGE Fits C52-210 Quick Release Steering Hub 9 on 3.852 in. Outer Bolt Circle 3 on 1.750 in. Inner Bolt Circle 5/16 in. Inner Bolt Holes Made in the USA
	C52-254	5/8 in. ID HEX SHAFT FITS PRO-WERKS STEERING HUBS: C52-210, C52-220, & C52-230 Made in the USA
	C52-260	ADAPTER STUB FITS INTO 5/8 in. STEERING HUB HEX Made in the USA
	C52-302	1/4 in. BLANK PLATE 24 in. X 24 in. 24 in. Tall 24 in. Wide 1/4 in. Thick
	C52-303	3/8 in. BLANK PLATE 24 in. X 24 in. 24 in. Tall 24 in. Wide 3/8 in. Thick
	C52-311	1/4 in. CENTER HOLE ONLY MID PLATE 24 in. X 24 in. 24 in. Tall 24 in. Wide 1/4 in. Thick 6 in. Dia. Crank Hole
	C52-312	3/8 in. CENTER HOLE ONLY MID PLATE 24 in. X 24 in. 24 in. Tall 24 in. Wide 3/8 in. Thick 6 in. Dia. Crank Hole
	C52-321	1/4 in. CHEVY MID PLATE 24 in. X 24 in. 24 in. Tall 24 in. Wide 1/4 in. Thick 6 in. Dia. Crank Hole Includes dowel pin locations and starter hole.
	C52-322	3/8 in. CHEVY MID PLATE 24 in. X 24 in. 24 in. Tall 24 in. Wide 3/8 in. Thick 6 in. Dia. Crank Hole Includes dowel pin locations and starter hole.
	C52-324	1/4 in. UNIVERSAL WITHOUT BOLT PATTERN MID PLATE 24 in. X 24 in. 24 in. Tall 24 in. Wide 1/4 in. Thick 6 in. Dia. Crank Hole 2 in. Dia. Vent Holes Includes dowel pin locations for Chevy
	C52-326	3/8 in. UNIVERSAL WITHOUT BOLT PATTERN MID PLATE 24 in. X 24 in. 24 in. Tall 24 in. Wide 3/8 in. Thick 6 in. Dia. Crank Hole 2 in. Dia. Vent Holes Includes dowel pin locations for Chevy
	C52-336	1/4 in. SMALL BLOCK MOPAR MID PLATE 24 in. X 24 in. 24 in. Tall 24 in. Wide 1/4 in. Thick 6 in. Dia. Crank Hole Includes dowel pin locations and starter hole.
	C52-337	3/8 in. SMALL BLOCK MOPAR MID PLATE 24 in. X 24 in. 24 in. Tall 24 in. Wide 3/8 in. Thick 6 in. Dia. Crank Hole Includes dowel pin locations and starter hole.
	C52-346	1/4 in. BIG BLOCK MOPAR MID PLATE 24 in. X 24 in. 24 in. Tall 24 in. Wide 1/4 in. Thick 6 in. Dia. Crank Hole Includes dowel pin locations and starter hole.
	C52-347	3/8 in. BIG BLOCK MOPAR MID PLATE 24 in. X 24 in. 24 in. Tall 24 in. Wide 3/8 in. Thick 6 in. Dia. Crank Hole Includes dowel pin locations and starter hole.
	C52-356	1/4 in. SMALL BLOCK FORD MID PLATE 24 in. X 24 in. 24 in. Tall 24 in. Wide 1/4 in. Thick 6 in. Dia. Crank Hole Includes dowel pin locations and starter hole for use with 164 tooth flexplate.
	C52-357	3/8 in. SMALL BLOCK FORD MID PLATE 24 in. X 24 in. 24 in. Tall 24 in. Wide 3/8 in. Thick 6 in. Dia. Crank Hole Includes dowel pin locations and starter hole for use with 164 tooth flexplate.
	C52-366	1/4 in. BIG BLOCK FORD MID PLATE 24 in. X 24 in. 24 in. Tall 24 in. Wide 1/4 in. Thick 6 in. Dia. Crank Hole Includes dowel pin locations and starter hole.
	C52-367	3/8 in. BIG BLOCK FORD MID PLATE 24 in. X 24 in. 24 in. Tall 24 in. Wide 3/8 in. Thick 6 in. Dia. Crank Hole Includes dowel pin locations and starter hole.
	C52-400	PROFILED MID PLATE UNIVERSAL WITHOUT BOLT PATTERN 1/4 in. Thick 6 in. Dia. Crank Hole 2 in. Dia. Vent Holes 1-1/4 in. Dia. notch Includes dowel pin locations for Chevy
	C52-401	PROFILED MID PLATE UNIVERSAL WITHOUT BOLT PATTERN 3/8 in. Thick 6 in. Dia. Crank Hole 2 in. Dia. Vent Holes 1-1/4 in. Dia. notch Includes dowel pin locations for Chevy
	C52-405	PROFILED MID PLATE UNIVERSAL WITHOUT BOLT PATTERN 1/4 in. Thick 6 in. Dia. Crank Hole 2 in. Dia. Vent Holes 1-1/2 in. Dia. notch Includes dowel pin locations for Chevy

< Previous Next >1 2 3 4 5 6