WHEEL SPACERS

Hard-anodized billet aluminum wheel spacers are CNC machined for accuracy. Available in either 1/4" or 1/2" thick. Stud Bushings are required to reduce hole diameter to 1/2".



ImagePart NumberDescription
C44-001
(2) 1/4 in. WHEEL SPACERS
3 Bolt Patterns:
5 on 4-1/2 in.
5 on 4-3/4 in.
5 on 5 in.

0.702 in. Hole Diameters
3-1/16 in. Center Hole
1/4 in. Thick
C44-003
(2) 1/2 in. WHEEL SPACERS
3 Bolt Patterns:
5 on 4-1/2 in.
5 on 4-3/4 in.
5 on 5 in.

0.702 in. Hole Diameters
3-1/16 in. Center Hole
1/2 in. Thick

Hard Anodized Billet Aluminum
C44-005
(2) 1/4 in. WHEEL SPACERS
5 on 5-1/2 in. "Floater Type" Bolt Pattern

0.702 in. Hole Diameters
3-1/2 in. Center Hole
1/4 in. Thick

Hard Anodized Billet Aluminum
C44-007
(2) 1/2 in. WHEEL SPACERS
5 on 5-1/2 in. "Floater Type" Bolt Pattern

0.702 in. Hole Diameters
3-1/2 in. Center Hole
1/2 in. Thick

Hard Anodized Billet Aluminum
C44-013
(2) 1/4 in. WHEEL SPACERS
2 Bolt Patterns:
5 on 135 mm
5 on 5-1/2 in.

0.702 in. Hole Diameters
4-1/4 in. Center Hole
1/4 in. Thick

Hard Anodized Billet Aluminum
C44-015
(2) 1/2 in. WHEEL SPACERS
2 Bolt Patterns:
5 on 135 mm
5 on 5-1/2 in.

0.702 in. Hole Diameters
4-1/4 in. Center Hole
1/2 in. Thick

Hard Anodized Billet Aluminum
C44-017
(2) 1/4 in. WHEEL SPACERS
6 on 5-1/2 in. Bolt Pattern

0.531 in. Hole Diameters
4-1/4 in. Center Hole
1/4 in. Thick

Hard Anodized Billet Aluminum
C44-019
(2) 1/2 in. WHEEL SPACERS
6 on 5-1/2 in. Bolt Pattern

0.531 in. Hole Diameters
4-1/4 in. Center Hole
1/2 in. Thick

Hard Anodized Billet Aluminum
C44-021
(2) 1/4 in. WHEEL SPACERS
2 Bolt Patterns:
8 on 170 mm
8 on 6-1/2 in.

0.578 in. Hole Diameters
5-1/8 in. Center Hole
1/4 in. Thick

Hard Anodized Billet Aluminum
C44-023
(2) 1/2 in. WHEEL SPACERS
2 Bolt Patterns:
8 on 170 mm
8 on 6-1/2 in.

0.578 in. Hole Diameters
5-1/8 in. Center Hole
1/2 in. Thick

Hard Anodized Billet Aluminum
 
 
 
;