MID MOTOR PLATES

ImagePart NumberDescription
C52-302
1/4 in. BLANK PLATE 24 in. X 24 in.
24 in. Tall
24 in. Wide
1/4 in. Thick


 See Product Details
C52-303
3/8 in. BLANK PLATE 24 in. X 24 in.
24 in. Tall
24 in. Wide
3/8 in. Thick


 See Product Details
C52-311
1/4 in. CENTER HOLE ONLY MID PLATE 24 in. X 24 in. 24 in. Tall
24 in. Wide
1/4 in. Thick
6 in. Dia. Crank Hole

 See Product Details
C52-312
3/8 in. CENTER HOLE ONLY MID PLATE 24 in. X 24 in. 24 in. Tall
24 in. Wide
3/8 in. Thick
6 in. Dia. Crank Hole

 See Product Details
C52-321
1/4 in. CHEVY MID PLATE 24 in. X 24 in. 24 in. Tall
24 in. Wide
1/4 in. Thick
6 in. Dia. Crank Hole

Includes dowel pin locations and starter hole.

 See Product Details
C52-322
3/8 in. CHEVY MID PLATE 24 in. X 24 in. 24 in. Tall
24 in. Wide
3/8 in. Thick
6 in. Dia. Crank Hole

Includes dowel pin locations and starter hole.

 See Product Details
C52-324
1/4 in. UNIVERSAL WITHOUT BOLT PATTERN MID PLATE 24 in. X 24 in. 24 in. Tall
24 in. Wide
1/4 in. Thick
6 in. Dia. Crank Hole
2 in. Dia. Vent Holes

Includes dowel pin locations for Chevy

 See Product Details
C52-326
3/8 in. UNIVERSAL WITHOUT BOLT PATTERN MID PLATE 24 in. X 24 in. 24 in. Tall
24 in. Wide
3/8 in. Thick
6 in. Dia. Crank Hole
2 in. Dia. Vent Holes

Includes dowel pin locations for Chevy

 See Product Details
C52-336
1/4 in. SMALL BLOCK MOPAR MID PLATE 24 in. X 24 in. 24 in. Tall
24 in. Wide
1/4 in. Thick
6 in. Dia. Crank Hole

Includes dowel pin locations and starter hole.

 See Product Details
C52-337
3/8 in. SMALL BLOCK MOPAR MID PLATE 24 in. X 24 in. 24 in. Tall
24 in. Wide
3/8 in. Thick
6 in. Dia. Crank Hole

Includes dowel pin locations and starter hole.

 See Product Details
C52-346
1/4 in. BIG BLOCK MOPAR MID PLATE 24 in. X 24 in. 24 in. Tall
24 in. Wide
1/4 in. Thick
6 in. Dia. Crank Hole

Includes dowel pin locations and starter hole.

 See Product Details
C52-347
3/8 in. BIG BLOCK MOPAR MID PLATE 24 in. X 24 in. 24 in. Tall
24 in. Wide
3/8 in. Thick
6 in. Dia. Crank Hole

Includes dowel pin locations and starter hole.

 See Product Details
C52-356
1/4 in. SMALL BLOCK FORD MID PLATE 24 in. X 24 in. 24 in. Tall
24 in. Wide
1/4 in. Thick
6 in. Dia. Crank Hole

Includes dowel pin locations and starter hole for use with 164 tooth flexplate.

 See Product Details
C52-357
3/8 in. SMALL BLOCK FORD MID PLATE 24 in. X 24 in. 24 in. Tall
24 in. Wide
3/8 in. Thick
6 in. Dia. Crank Hole

Includes dowel pin locations and starter hole for use with 164 tooth flexplate.

 See Product Details
C52-366
1/4 in. BIG BLOCK FORD MID PLATE 24 in. X 24 in. 24 in. Tall
24 in. Wide
1/4 in. Thick
6 in. Dia. Crank Hole

Includes dowel pin locations and starter hole.

 See Product Details
C52-367
3/8 in. BIG BLOCK FORD MID PLATE 24 in. X 24 in. 24 in. Tall
24 in. Wide
3/8 in. Thick
6 in. Dia. Crank Hole

Includes dowel pin locations and starter hole.

 See Product Details
C52-421
1/4 in. CHEVY MID PLATE 24 in. X 36 in. 24 in. Tall
36 in. Wide
1/4 in. Thick
6 in. Dia. Crank Hole

Includes dowel pin locations and starter hole.

 See Product Details
C52-424
1/4 in. UNIVERSAL WITHOUT BOLT PATTERN MID PLATE 24 in. X 36 in. 24 in. Tall
36 in. Wide
1/4 in. Thick
6 in. Dia. Crank Hole
2 in. Dia. Vent Holes

Includes dowel pin locations for Chevy

 See Product Details
C52-436
1/4 in. SMALL BLOCK MOPAR MID PLATE 24 in. X 36 in. 24 in. Tall
36 in. Wide
1/4 in. Thick
6 in. Dia. Crank Hole

Includes dowel pin locations and starter hole.

 See Product Details
C52-446
1/4 in. BIG BLOCK MOPAR MID PLATE 24 in. X 36 in. 24 in. Tall
36 in. Wide
1/4 in. Thick
6 in. Dia. Crank Hole

Includes dowel pin locations and starter hole.

 See Product Details
C52-456
1/4 in. SMALL BLOCK FORD MID PLATE 24 in. X 36 in. 24 in. Tall
36 in. Wide
1/4 in. Thick
6 in. Dia. Crank Hole

Includes dowel pin locations and starter hole for use with 164 tooth flexplate.

 See Product Details
C52-466
1/4 in. BIG BLOCK FORD MID PLATE 24 in. X 36 in. 24 in. Tall
36 in. Wide
1/4 in. Thick
6 in. Dia. Crank Hole

Includes dowel pin locations and starter hole.

 See Product Details

MID MOTOR PLATE

Precision CNC machined from 6061-T6 aluminum, these plates may be trimmed to fit your particular application.
 
 
 
;