U-Joints (Roller Bearing)

Find your combination.


ImagePart NumberDescription
C42-365
5/8 BORED X 5/8 BORED U JOINT
5/8 in. bored inside diameter on both ends.

Made in the USA
See Product Details »
C42-366
3/4 BORED X 3/4 BORED U JOINT
3/4 in. bored inside diameter on both ends.

Made in the USA
See Product Details »
C42-368
9/16-26 X 3/4 BORED U JOINT Spline is correctly sized to fit the Stiletto Pro-box,C42-348 & Pinto style rack

9/16-26 female spline
3/4 in. bored inside diameter
1/4-28 NF set screws on splined end

Made in the USA
See Product Details »
C42-370
5/8-36 X 3/4 BORED U JOINT Spline is correctly sized to fit the Stiletto 5/8-36 pinion

5/8-36 female spline
3/4 in. bored inside diameter
1/4-28 NF set screws on splined end

Made in the USA
See Product Details »

Precision in Motion

 



These durable and smooth operating U-joints are engineered for high load applications. Precision machined alloy steel bodies are fitted with caged needle bearings and a slight pre-load to create a joint without backlash. This results in enhanced sensitivity at the steering wheel, making even the smallest amount of steering input more effective. 

Designed for longevity without compromise, they are pre-greased and effectively sealed with hi temp O-rings to retain grease in severe conditions. Capable of a maximum of 32 degrees of operating angle, with a recommended angle not to exceed 20 degrees for the smoothest result.

The splined ends of these U-joints are sized correctly; we have found that this is often not the case with competitive brands of U-joints, as they have designed their spline broaching tooling off of generations of parts in service and not to the original manufacturers specifications.

We guarantee that the U-joints we offer will fit their intended spline application.

Proudly Made in the USA.
 
 
 
;