ImagePart NumberDescription
C42-332
STILETTO GEN 2 PRO BOX RACK N PINION 20:1 Ratio
Accepts 7/16 in. Rod Ends.

Made in the USA
See Product Details »
C42-354
STILETTO SPLIT BOLT COUPLER 9/16-26 SPLINE, 3/4" BORE
Spline is correctly sized to fit the Stiletto Pro-box, C42-348 & Pinto OEM style rack

9/16-26 female spline
3/4 in. bored inside diameter
Machined from 1018 mild steel

Made in the USA
See Product Details »
C42-357
STILETTO BOOTS (2) WITH WIRES (4)
Fits C42-332 PRO RACK & PINION

Nylon reinforced neoprene

2 1/8 " OD
1 1/4 " ID
11 Peaks

Made in the USA
See Product Details »
C42-359
STILETTO SERVICE LUBE FOR RACK N PINIONS
Includes specially formulated assembly lube, and boot wires.

See Product Details »
C42-368
9/16-26 X 3/4 BORED U JOINT Spline is correctly sized to fit the Stiletto Pro-box,C42-348 & Pinto style rack

9/16-26 female spline
3/4 in. bored inside diameter
1/4-28 NF set screws on splined end

Made in the USA
See Product Details »
C42-403
DUAL LOCK SPLINED COUPLER 9/16-26 SPLINE, 3/4" BORE Spline is correctly sized for Stiletto Pro-box, C42-348 & Pinto style rack.

Screws are at 90 deg. for positive lock.

9/16-26 female spline
3/4 in. bored inside diameter
Machined from 4130N Chromoly

Made in the USA
See Product Details »

This assembly is currently SOLD OUT. 

We are re-tooling the next generation of this item for productionandapologize for the unavailability at this time.  

Gen 2 Pro Box



The Gen 2 Pro-Box is a very desirable for new car construction, a purpose built drag race specific unit for full bodied vehicle categories - this is the upgrade alternative to the early Ford Pinto rack-n-pinion and other helical pinion designs.

Since 1972, the smooth Swiss Watch action of any Stiletto steering box has long been the professional racer’s choice.

Racers often comment that when using a Stiletto Gen 2 Pro-Box, the steering feels so smooth it is like having power steering. That’s because the heat-treated, aircraft-quality pinion rolls effortlessly on precision ball bearings over the high-tensile-strength chromoly rack. This durable spur gear design is one of the most efficient methods of linear motion available.

At the heart of the unit, the housing is precision machined of ultra-tough billet 2024 aircraft aluminum. This updated design results in a lighter and stronger complete assembly - tipping the scale at a mere five pounds.  

This steering nox is intended to be used for front steer applications (steering arm relative to steering axis), when mounted as shown. A right-hand drive version also is available for international car builders, and rear steer applications.

Total rack travel of 5" with 3 turns at the pinion. The Aluminum clevises accept 7/16" rod ends, at the tie rod attachment points. The 20:1 steering ratio is ideal for drag racing, a steering shaft coupler is included.

Stiletto Steering Systems is considered to be one of the finest rack-n-pinions on the market, proudly made in the USA.


Customer Comments:


"The best steering out there!"
             Tom Bailey, Two-Time Hot Rod Drag Week Winner
                   Owner/Driver of Sick Seconds 2.0


"Our record-setting suspension kits utilize Stiletto Gen 2 racks for their unmatched quality, effortless turning and ultra lightweight."
             Kody Schendel of Racecraft, Inc.


Read the Brochure Read the Newsletter
 
 
 
;