Homepage
Our Story
Find a Dealer
Contact Us
Profiled Mid Motor Plates
Browse by Category >
>
Motor Plates
>
Profiled Mid Motor Plates
Profiled Mid Motor Plate
Choose your application.
Profiled Mid Motor Plates
Bolt Pattern
Thickness
Notch
Part No.
SB & BB Chevy
1/4”
1-1/4”
C52-410
SB & BB Chevy
1/4”
1-1/2”
C52-415
SB & BB Chevy
3/8”
1-1/4”
C52-411
SB & BB Chevy
3/8”
1-1/2”
C52-416
Without Bolt Pattern
1/4”
1-1/4”
C52-400
Without Bolt Pattern
1/4”
1-1/2”
C52-405
Without Bolt Pattern
3/8”
1-1/4”
C52-401
Without Bolt Pattern
3/8”
1-1/2”
C52-406
Image
Part Number
Description
C52-400
PROFILED MID PLATE UNIVERSAL WITHOUT BOLT PATTERN
1/4 in. Thick
6 in. Dia. Crank Hole
2 in. Dia. Vent Holes
1-1/4 in. Dia. notch
Includes dowel pin locations for Chevy
C52-401
PROFILED MID PLATE UNIVERSAL WITHOUT BOLT PATTERN
3/8 in. Thick
6 in. Dia. Crank Hole
2 in. Dia. Vent Holes
1-1/4 in. Dia. notch
Includes dowel pin locations for Chevy
C52-405
PROFILED MID PLATE UNIVERSAL WITHOUT BOLT PATTERN
1/4 in. Thick
6 in. Dia. Crank Hole
2 in. Dia. Vent Holes
1-1/2 in. Dia. notch
Includes dowel pin locations for Chevy
C52-406
PROFILED MID PLATE UNIVERSAL WITHOUT BOLT PATTERN
3/8 in. Thick
6 in. Dia. Crank Hole
2 in. Dia. Vent Holes
1-1/2 in. Dia. notch
Includes dowel pin locations for Chevy
C52-410
PROFILED MID CHEVY PLATE
1/4 in. Thick
6 in. Dia. Crank Hole
1-1/4 in. Dia. notch
Chevy dowel pin locations
C52-411
PROFILED MID CHEVY PLATE
3/8 in. Thick
6 in. Dia. Crank Hole
1-1/4 in. Dia. notch
Chevy dowel pin locations
C52-415
PROFILED MID CHEVY PLATE
1/4 in. Thick
6 in. Dia. Crank Hole
1-1/2 in. Dia. notch
Chevy dowel pin locations
C52-416
PROFILED MID CHEVY PLATE
3/8 in. Thick
6 in. Dia. Crank Hole
1-1/2 in. Dia. notch
Chevy dowel pin locations
Profiled Mid Motor Plates
These Pro-werks profiled mid-plates are shaped and ready to install, complete with the drilled bolt holes for chassis mounts. Available in different thicknesses, for either 1-1/4" or 1-1/2" diameter tubular frame rails, measuring 19-1/2" centers on the frame rail notches. Includes Chevy dowel pin locations, 6" diameter center hole, and two 2" diameter vent holes. Compatible with Pro-werks profiled front motor plates.
If you are building a new car, this is a great way to go. Understand that if you are replacing an existing motor plate, the notched locations may not match what you have - unless your original is a Pro-werks profiled Motor Plate.
All of the Pro-werks Motor Plates are precision CNC machined from premium 6061-T6 aluminum to exact tolerances for optimum fit and finish. The accuracy obtained from CNC machining is superior to die stamping, laser or water jet cutting methods that have grown to be popular by other manufacturers.
Proper engine alignment can only be achieved with accurate locating of the engine to the drive train. This is an area that should not be compromised.
The nations top pros count on us - so should you.
Do you need unique features; a different thickness or special lightening?
Call, or email us with your special requests – and we will do what we can to help.
Pro-werks Motor Plates are precision CNC machined in Mears, Michigan by skilled American machinists.
See What's NEW! »
Skip Past Menu
Browse by Category >
Access Doors
Apparel
Bar Mounts
Battery Accessories
Bottle Mounts
Cables & Hardware
Cage Kits & Pre-Bent Tubing
Clevises
CO2 Bottle Knobs
Dragster Noses
Driveline
Dzus Buttons & Panel Fasteners
Escape Latches
Fill Caps
Levers
Motor Plates
NACA Ducts
Nuts & Washers
Pedal Kit
Promotional Displays
Rod End Components
Steering Components
Stiletto Steering
Tabs & Brackets
Tools
Tube Adapters
Weld-In Plumbing Bungs
Windscreens
Wings
Literature
Browse the website for
latest product selection.
View the Product Guide
View the Brochure
Careers
Terms & Conditions
;