Pull with Confidence
Pro-Werks Silver Jacket Drag Chute Cable Kit includes
everything needed for installing a cable release system for a
parachute.
This kit includes a 15 foot Silver Jacket Premium 33 series chute
control cable, a CNC machined aluminum release lever, clevis end, cable mounting hardware, and weld-on tabs.
The final overall length maybe altered by cutting the exposed wire end if required.
The Silver Jacket Premium 33 series parachute cable comes in the trademark silver color which compliments any paint color scheme.
Product specifications:
- Grooved housing for Clip Type mounting on one end
- 10-32 NF threaded rod on one end
- Exposed 0.075" diameter solid stainless wire on one end
- Provides a total of 3" of travel
- Flexible housing measures only .325" outside diameter
- Cable length is measured tip to tip
Cable Overview:
Solid wire core
The solid wire core cable is desirable for chute release applications, the final overall length may be altered by cutting the exposed wire end if needed.
Fitted with efficient dynamic seals and requiring very little effort; these lightweight cables have a full circle of reinforcement wires to protect and support the inner liner; influencing positive load transfer with minimal
lost motion.
Grooved housing on one end, conduit on the other end.
This combination should be considered as an upgrade replacement for Teleflex Morse type cables.
Measuring Tip:
To determine the proper length for your application, measure the
tip-to-tip cable length by using a flexible rule to snake through the actual intended cable route.
For additional information, watch the Video below to see all the Silver Jacket Cables in action !
The Pro-Werks’ Silver Jacket Cables are proudly
Made in the USA.
Make the connection.
Click this image to see the many mounting options available; including Cable Ends, Knobs, and Handles.
Customer Comments:
"My pulling tractor has four supercharged engines and I can depend on 12 Silver Jacket cables to control them with ease."
– As shared with us at the PRI Show
"Wow! Silver Jacket cables are smooth as butter."
– Another Satisfied Customer at the PRI Show
Q:
|
How do I measure for total cable length?
|
A:
|
Use a flexible ruler and snake it through the intended cable route. The cable length is measured from tip-to-tip of the attaching ends, not the cable housing mounting points. |
Q:
|
My cable installation is close to the exhaust system. How do I protect it from the heat?
|
A:
|
When installing a cable in an excessive heat environment, incorporating a heat deflector shield with adequate air gaps between the heat source and the cable housing is recommended. |
For the most efficient and longest cable operating life it is recommended to install the cable so the heaviest load is in a pulling motion whenever possible.
Retracted Length:
4.25 in.
Thread:
10-32
Diameter Mount Point:
0.25 in.
Extended Length:
7.25 in.
Hole Diameter:
0.188 in. 2 Places
Center To Center:
2.438 in.
Length:
5.0 in.
Thickness:
0.188 in.
Overall Length:
5.75 in.
Width:
0.438 in.
Slot Width:
0.188 in.
Thru Holes:
0.188 in.
Height:
1.688 in.
Thread:
10-32
Diameter:
0.25 in.
Height:
0.938 in.
Overall Width:
0.75 in.
Overall Height:
1.25 in.
Thickness:
0.125 in.