Cable Hardware

Simplify your installation.


ImagePart NumberDescription
C42-510
CHUTE / FUEL LEVER
5 in. Long
3/16 in. Thick
3/16 in. Diameter Holes

CNC machined of Billet Aluminum
Vibratory satin finish

Made in the USA

See Product Details »
C73-375
PRO-GRIP HALF CLAMP, SILVER
Fits push / pull " CLIP TYPE " Cables

Mounts with one # 10 fastener
Can be tightened to prevent pivoting

CNC machined of Billet Aluminum
Anodized for durability

Made in the USA

See Product Details »
C73-376
PRO-GRIP FULL CLAMP, SILVER
Fits push / pull " CLIP TYPE " Cables

Mounts with one #10 fastener
Can be tightened or mounted snug allowing to pivot slightly

CNC machined of Billet Aluminum
Anodized for durability

Made in the USA

See Product Details »
C73-377
PRO-GRIP DUAL FULL CLAMP, SILVER
Holds two push / pull " CLIP TYPE " Cables

A classy upgrade alternative to the dual flip latch type mount
Mounts with two # 10 fasteners
CNC machined of Billet Aluminum
Anodized for durability

Made in the USA

See Product Details »
C73-380
SOLID ROD END CABLE END
10-32 NF Right Hand Threads

3/16 in. Diameter Hole
(There is enough material to open Hole up to 7/16 in. Dia. if needed)

CNC machined of Billet Aluminum
Vibratory satin finish

Made in the USA

See Product Details »
C73-400
BLACK ALUMINUM T HANDLE 10-32 NF THREAD
10-32 NF Right Hand Threads

Precision CNC machined of Billet Aluminum
Anodized for durability

Made in the USA

See Product Details »
C73-401
RED ALUMINUM T HANDLE 10-32 NF THREAD
10-32 NF Right Hand Threads

Precision CNC machined of Billet Aluminum
Anodized for durability

Made in the USA

See Product Details »
C73-405
BLACK ALUMINUM T HANDLE 1/4-20 NC THREAD
1/4-20 NC Right Hand Threads

Precision CNC machined of Billet Aluminum
Anodized for durability

Made in the USA

See Product Details »
C73-406
RED ALUMINUM T HANDLE 1/4-20 NC THREAD
1/4-20 NC Right Hand Threads

Precision CNC machined of Billet Aluminum
Anodized for durability

Made in the USA

See Product Details »
C73-410
BLACK ALUMINUM EZ GRIP KNOB 10-32 NF THREAD 10-32 NF Right Hand Threads

Precision CNC machined of Billet Aluminum
Anodized for durability

Made in the USA
See Product Details »
C73-415
BLACK ALUMINUM EZ GRIP KNOB 1/4-20 NC THREAD
1/4-20 NC Right Hand Threads

Precision CNC machined of Billet Aluminum
Anodized for durability

Made in the USA

See Product Details »
C90-040
QUICK RELEASE BALL JOINT CABLE END 10-32 x 10-32
10-32 NF Right Hand Threads on Cable Attachment and Stud

Plated Mild Steel construction

See Product Details »
C90-044
QUICK RELEASE BALL JOINT CABLE END 10-32 x 1/4-28
10-32 NF Right Hand Threads on Cable Attachment

1/4-28 NF Right Hand Threads on Stud

Plated Mild Steel construction
See Product Details »
C90-080
CLEVIS CABLE END 10-32 x 3/16
10-32 NF Right Hand Threads on Cable Attachment

3/16 in. Slot
3/16 in. Diameter Pin

Plated Mild Steel construction
See Product Details »
C90-090
ROD END CABLE END 10-32 x 3/16
10-32 NF Right Hand Threads on Cable Attachment

3/16 in. Hole Diameter in Ball
Ball Width 0.312 in.

See Product Details »
C90-106
SINGLE QUICK DISCONNECT CABLE CLAMP - STAINLESS STEEL
Fits " CLIP TYPE " Cables

Flip latch provides quick disconnect

Mounts with two # 10 fasteners

See Product Details »
C90-115
SADDLE MOUNT WITH SHIM - CABLE CLAMP
Fits " CLIP TYPE " Cables

Mounts with two # 10 fasteners

Plated Mild Steel construction

See Product Details »

Quality Cable Hardware is a must.


Make the connection with this complete offering of cable mounting hardware and cable ends.


This is the good stuff; high quality specialty hardware - not available at your local hardware store.


All Pro-werks cable hardware is compatible with Silver Jacket Cables and most other 33C series Teleflex Morse type control cables.



These Cable Ends may be used on either clip type or bulkhead cables:


Ball Joint End

Quick release, 10-32 female x 10-32 NF stud >

Quick release, 10-32 female x 1/4-28 NF stud >



Clevis End

10-32 female 3/16" slot and 3/16" dia. pin >



Solid Rod End

10-32 female x 3/16" dia. hole >  (May be drilled larger if needed.)



Rod End

10-32 female x 3/16" dia. hole in ball >



Maintenance Tip:  For optimum cable package performance, periodically inspect and replace any worn out cable hardware when necessary.




Redefining Motion Transfer


Cables are an integral part of most race vehicles; the unsung heroes of control. When your success depends on the performance of a part, it makes sense to choose the best.


Precise and quick control is what it's all about.



That’s where Pro-werks comes in, with the trademark Silver Jacket Cables. Whether you are modulating the throttle, grabbing a gear, or pulling your ‘chute, you will probably use a push-pull control cable to do it.
 

Popular uses include:
  • Throttle Controls
  • Shutoff Valves
  • Parachute Releases
  • Shifter Hookups
  • Remote Battery Switches


As the Silver Jacket name implies, these 33 series cables come in the trademark silver color - that will compliment any paint color scheme. The flexible housing measures only .325" outside diameter.


Maximum Flexibility - Smooth Operation



Fitted with efficient dynamic seals and requiring very little effort, these lightweight cables have a full circle of reinforcement wires to protect and support the inner liner - delivering positive load transfer with minimal lost motion.


Cable Overviews:



Solid wire core

 

 

Armored multi-strand core


Silver Jacket Cables are available with either a solid wire core or in our exclusive Ultimate series; featuring an armored flexible multi-strand, stainless steel core - the ultimate in cable construction.

Both are ideal for any cable operated application that requires pushing or pulling, and well suited for extreme use environments. Any of these combinations should be considered as upgrade replacements for Teleflex Morse type cables.



Mounting options: (click image to learn more)


  • Clip Type  (grooved housing each end)

  • Bulkhead Type  (threaded housing each end)

  • Combo Type  (threaded housing one end, grooved on the other)

  • Chute Type  (grooved housing one end, conduit the other)



Check out the impressive load ratings on each type, these aren’t a flimsy garden equipment control cable that will let you down when you need it the most.

Here's another bonus that you’ll appreciate; Silver Jacket Cables are  available in 6" increments, so you can affordably get a length that you need for a proper fit!


Measuring Tip:  To determine the proper length for your application, measure the tip-to-tip cable length by using a flexible rule to snake through the actual intended cable route.


For additional information, watch the Video below to see all the Silver Jacket Cables in action !


The Pro-Werks’ Silver Jacket Cables are proudly  Made in the USA.

Customer Comments:


"My pulling tractor has four supercharged engines and I can depend on 12 Silver Jacket cables to control them with ease."
             As shared with us at the
PRI Show


"Wow! Silver Jacket cables are smooth as butter."
            
Another Satisfied Customer at the PRI Show


 
 
 
;